Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (813 mm) minimum....
Search Results "Minimum Dimension"
-
11B-1007.2 Accessible routes
-
1007.2 Accessible Routes
Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
-
Executive Summary
Reference information is also often included on the characteristics of mobility devices like illustrations and dimensions of unoccupied or occupied wheelchairs....
-
Omnia Industries Inc. Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass No.2036SF
Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass Dimensions: Rose: 7/16" projection x 2-9/16" square Turnpiece: 1-1/2" x 1/4", 1-1/8" projection, 1-7/16" square...
-
Delta Vero™ Single Handle Centerset Lavatory Faucet with Riser Less Pop-Up 753LF
Drain assembly sold separately Meets standards set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Single hole installation Rigid spout Assembled dimensions...
-
Fifi Large Interior Wall Sconce by Hampstead
Dimensions: L:23.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 55W 2G11: #46042 Gold: 1 x 55W 2G11: #46044...
-
Dodo 12 Interior Wall Sconce by Hampstead
Dimensions: D:8" H:12" E:3" Diffuser: Blown Glass Number of Diffuser: 1 Finish: Satin Nickel Color: Topaz Certification: ADA and cUL Options: Satin Nickel: 60W Torpedo...
-
Fifi Small Interior Wall Sconce by Hampstead
Dimensions: L:15.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 24W 2G11: #46038 Gold: 1 x 24W 2G11: #46040...
-
M303.2.4.2.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum measured from the toe end of the wheelchair...
-
M301.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum....
-
Clear Width [1016.3]
The clear width of ORARs must be a minimum of 36 inches....
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
11B-502.5 Vertical clearance
Parking spaces, access aisles and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. [2010 ADAS] 502.5 Vertical Clearance. ...
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
General Seating: ADA Standard Section 221.2.1.1
Section 221.2.1.1 covers scoping requirements in the current ADA Standards for general seating in assembly areas.
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the demarcation line at the face of the curb between the...
-
Identification: ADA Standard Section 502.6
Section 502.6 covers the current ADA Standards for parking space identification signs.
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
Beveled: ADA Standard Section 303.3
Section 303.3 covers the current ADA Standards for beveled level changes.
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall be located so the edge nearest the curb is 6 inches (152 mm) minimum and 8 inches (203 mm) maximum from the demarcation line at the face of the curb between the...
-
11B-404.2.4 Maneuvering clearances
Minimum maneuvering clearances at doors and gates shall comply with Section 11B-404.2.4....
-
1011.4.2 Wheelchair Space
Wheelchair spaces shall be 30 inches (760 mm) minimum by 48 inches (1220 mm) minimum. ...
