Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....
Search Results "Minimum Dimension"
-
703.2.5 Character Height
-
4.7.7 Water Spouts
Water spouts shall be located in the space so that the water spout is 11 inches (280 mm) minimum and 12 inches (305 mm) maximum from the rear center of the long side of the clear floor or...
-
4.34.6.4(4)
The knee space shall have a minimum clear width of 30 in (760 mm) and a minimum clear depth of 19 in (485 mm)....
-
1009.7.4 Stairways
Stairways that are part of the means of egress for the exterior area for assisted rescue shall provide a minimum clear width of 48 inches (1220 mm) between handrails....
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
802.1.3 Depth
Where a wheelchair space can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
Cavity Sliders CL100 ADA LaviLock Hardware Set with 'Vacant / In Use' Indicator
Stainless Steel Indication Plates Slide Locking Buttons including Emergency Release CL100 Mortise Lock Case IMPORTANT: Operable parts of hardware must be mounted 34 inches (865mm) minimum...
-
Willoughby Industries UW-1317-HEU-FA Series Contoured High Efficiency Urinal
High Efficiency Urinal shall be washout type requiring 1/8 GPF to 1/2 GPF flush valve and 25 psi minimum flushing pressure. Trap shall be fully enclosed and maintain a 3" seal....
-
Allegion LCN 5010 Series Overhead Concealed Door Control
cylinders for interior doors to 5’0” and exterior doors to 4’0” Handed for right or left swinging doors For hollow metal or wood, door and frame Aluminum frame requires minimum...
-
Lift-U® Fold-Out Rising Floor Ramp
Gaps in floor when deployed – minimal Hinge Knuckles between Ramp & Bus structure – eliminated SPECIFICATIONS Clear width at ramp surface – 30 Inches Minimum...
-
Belson Outdoors Recycled Plastic Universal Access Picnic Table
Table top and seats come in 2" x 10" or 2" x 6" nominal dimensioned planks. Wheelchair accessible tables are identified "Universal Access" by a blue end cap....
-
Diadema 80 Interior Wall Sconce by Hampstead
Stock Number: 17085 Dimensions: H:5.2" L:32" E:3.92" Diffuser: Hand-Crafted Transparent Glass Tubes Finish: Chrome Color: Clear Glass Bulb: 1 x 55W 2G11FL Certification...
-
Bobrick Koala Kare Countertop Recess Mounted Baby Changing Station KB112-01RE
Unit Dimensions: 32” W x 19⅝” L (812 x 497 mm) Depth (closed): 3” (76 mm) Shipping Weight: 6 lbs...
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
1016.4.1 Size
A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or 2....
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
Edge Protection
Edge Protection Where railings, guards, or handrails are provided, edge protection must be provided and extend a minimum of 2 inches above the ground or deck surface....
-
610.3.2 L-Shaped Seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (380 mm) minimum and 16 inches (405 mm) maximum from the seat wall....
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
A vehicular pull-up space 2.4 meters (8 feet) wide minimum and 6.1 meters (20 feet) long minimum must be provided at accessible passenger loading zones....
-
T502.4 Doorways with Steps on Over-the-Road Buses
On over-the-road buses, doorways with steps shall provide an opening with a clear width of 30 inches (760 mm) minimum. Exceptions: 1....
-
1016.4.1 Size
A space 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum; or b....
-
Clear Width [§405.5]
Clear Width [§405.5] Ramp runs must have a clear width of 36” minimum (measured between handrails where provided)....
-
11B-411.2.1.2.3 Accessibility function button
The International Symbol of Accessibility shall comply with Section 11B-703.7.2.1, and shall be 5/8 inch (15.9 mm) minimum in height. The indication shall be three raised dots....
