Characters shall be ½ inch (12.7 mm) high minimum....
Search Results "Minimum Dimension"
-
11B-407.4.8.1.1 Size
-
§ 37.147 Considerations during FTA review
In reviewing each plan, at a minimum FTA will consider the following:...
-
11B-407.4.8.1.1 Size
Characters shall be ½ inch (12.7 mm) high minimum....
-
Omnia Industries Inc. Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass No.2036SF
Square Rose Exterior Modern Mortise Entrance Lever Lockset - Solid Brass Dimensions: Rose: 7/16" projection x 2-9/16" square Turnpiece: 1-1/2" x 1/4", 1-1/8" projection, 1-7/16" square...
-
Fifi Small Interior Wall Sconce by Hampstead
Dimensions: L:15.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 24W 2G11: #46038 Gold: 1 x 24W 2G11: #46040...
-
Fifi Large Interior Wall Sconce by Hampstead
Dimensions: L:23.75" E:3" Diffuser: Laser Cut Steel Finish: White, Bronze, Gold and Silver Certification: cUL Options: White: 1 x 55W 2G11: #46042 Gold: 1 x 55W 2G11: #46044...
-
Dodo 12 Interior Wall Sconce by Hampstead
Dimensions: D:8" H:12" E:3" Diffuser: Blown Glass Number of Diffuser: 1 Finish: Satin Nickel Color: Topaz Certification: ADA and cUL Options: Satin Nickel: 60W Torpedo...
-
Delta Vero™ Single Handle Centerset Lavatory Faucet with Riser Less Pop-Up 753LF
Drain assembly sold separately Meets standards set by Americans with Disabilities Act (ADA) 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa Single hole installation Rigid spout Assembled dimensions...
-
M301.2.1 Adjustability
A low transfer position at a height of 17 inches (430 mm) minimum and 19 inches (485 mm) maximum; B. A high transfer position at 25 inches (635 mm); and C....
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
M302.2.1 Adjustability
A low transfer position at a height of 17 inches (430 mm) minimum and 19 inches (485 mm) maximum; B. A high transfer position at 25 inches (635 mm); and C....
-
1009.2.3 Clear Deck Space
The space shall be 36 inches (915 mm) wide minimum and shall extend forward 48 inches (1220 mm) minimum from a line located 12 inches (305 mm) behind the rear edge of the seat....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
307.4 Vertical Clearance
Vertical clearance shall be 80 inches (2030 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2030 mm) high....
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an area...
-
604.8.2.2 Doors
with 404, except that if the approach is to the latch side of the compartment door, clearance between the door side of the compartment and any obstruction shall be 42 inches (1065 mm) minimum...
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
903.4 Back Support
Back support shall be 42 inches (1065 mm) long minimum and shall extend from a point 2 inches (51 mm) maximum above the seat surface to a point 18 inches (455 mm) minimum above the seat...
-
M302.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the examination surface...
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
11B-604.7.1 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
11B-307.4 Vertical clearance
Vertical clearance shall be 80 inches (2032 mm) high minimum. Guardrails or other barriers shall be provided where the vertical clearance is less than 80 inches (2032 mm) high....
-
Definition of "wheelchair." (Section-by-Section Analysis)
Some transit system commenters wanted size, weight, and dimensions to be part of the definition because of concerns about costs associated with having to accommodate devices that exceed...
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
