Control panels shall be on a side wall, 12 inches (305 mm) minimum from any adjacent wall....
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
11B-409.4.6.2 Location
-
11B-407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (889 mm) minimum above the finish floor....
-
Mohawk Group Chilled Check Carpet Tiles
available for future renovation or expansion Collection Get Smart Brand Lees Product Type Broadloom Design Minimum...
-
Mannington Mills Classics II Collection Commercial Carpet
It is an alternate option available on Integra HP or UltraBac RE broadloom backing requiring a 500 sq yd minimum. "Yet here is peace for ever new!...
-
Pilot Rock Bench B110C with Full-length Grab Bar
SURFACE MOUNT: Model B110C Features: 6 ft. long, portable/surface mount frames, grab bar 35" high, seat width 20", seat height 18-1/2" (nom. dimensions), includes 9/16" dia. anchor holes...
-
GE® 24" Standard Clean Free-Standing Gas Range JGAS02SENSS
Handle Color Stainless Steel Handle Design D-shaped Claims and Certifications ADA Compliant Weights and Dimensions...
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
The Committee used a 24-inch dividing point for table width to accommodate the dimensions for the maximum reach range....
-
Back Support
In addition, clarification has been added that the dimensions for back support are measured from the surface of the seat. Comment....
-
Notes
Consequentially, health care professionals who are purchasing examination tables and chairs typically focus on the seated height dimension....
-
Door King Inc. 6004 Column Mount Swing Gate Operator
*Dimensions (operator only): 5.13"W x 5.25"H x 16"L. Actuator main arm: 17.5" in length, with a total Height of 6.5" including the arm drive bolt....
-
Door King Inc. 6400 In-Ground Swing Gate Operator
Dimensions (operator only): 17"W x 6"H x 12"L Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D...
-
606.4 Faucets
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....
-
Question 4
Is the full width (minimum 3 feet) of the entire accessible route up to the business entrance clear of obstacles?...
-
606.4 Faucets
Hand-operated metering faucets shall remain open for 10 seconds minimum....
-
305.7.2 Parallel Approach
Alcoves shall be 60 inches (1525 mm) wide minimum where the depth exceeds 15 inches (380 mm)....
-
505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1 1/2 inches (38 mm) minimum....
-
305.7.1 Forward Approach
Alcoves shall be 36 inches (915 mm) wide minimum where the depth exceeds 24 inches (610 mm)....
-
5.8.2.4 Unobstructed Floor Space
The unobstructed floor space in front of the base support should be a minimum of 17 inches deep....
-
5.7.1.1 Lift Compatibility Clearance in Base for Stretchers
The base of the equipment must provide a clearance of 39 inches wide minimum....
-
T503.2 Ramps and Bridgeplates
When ramps or bridgeplates are deployed, the walking surface shall be lighted with 2 foot-candles (22 lux) minimum of illumination....
-
407.3.5 Door Delay
Elevator doors shall remain fully open in response to a car call for 3 seconds minimum....
-
306.2.5 Width
Toe clearance shall be 30 inches (760 mm) wide minimum. Figure 306.2 Toe Clearance...
-
1132A.3, Item 6
The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005....
