mm) minimum and 48 inches (1219 mm) maximum above the shower floor and shall be located on the control wall 15 inches (380 mm) maximum from the centerline of the seat toward the shower opening...
Search Results "End-Opening Door"
-
11B-608.5.1 Transfer type shower compartments
-
11B-604.9.5 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
Additional Transfer Techniques: Use of Stretchers and Gurneys
Other equipment may be located in spaces with no room at the end of the table making it impossible to position a portable floor lift....
-
1007.8 Exterior area for assisted rescue
The exterior area for assisted rescue must be open to the outside air and meet the requirements of Section 1007.6.1....
-
1003.2.13.7 Exterior area for assisted rescue
The exterior area for assisted rescue must be open to the outside air and meet the requirements of Section 1003.2.13.5.1....
-
Section 36.303(g)(6) Alternative Technologies
Department should require open movie captioning....
-
1. Common Problems and Solutions in Website Accessibility
Resources providing more detailed information on accessible website design are provided at the end of this Chapter....
-
Terminal
Device or software with which the end user directly interacts and that provides the user interface....
-
Terminal
Device or software with which the end user directly interacts and that provides the user interface....
-
Terminal
Device or software with which the end user directly interacts and that provides the user interface....
-
Terminal
Device or software with which the end user directly interacts and that provides the user interface....
-
M301.2.3 Size (Section-by-Section Analysis)
discussed in Section IV.B.1.c (Significant Changes – Transfer Surface Size), in the final rule the Access Board has revised this provision to account for the two types of transfer surfaces (end...
-
A.2.ii. - Should EIT be compatible with assistive technology?
These products, such as information kiosks, copiers, or other similar products that do not permit a user to install or connect assistive technology, must be designed so that an end user...
-
M301.2.3 Transfer Surface Transfer Sides
The option to transfer will be required only on one long side of the patient scanning/imaging table and not at the “foot” or “head” end of such surfaces....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
1002.5.3 Transfer Entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
11B-1002.5.3 Transfer entry
Where openings are provided for transfer to amusement ride seats, the openings shall provide clearance for transfer from a wheelchair or mobility aid to the amusement ride seat....
-
2010 ADA Standards
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
Hadrian Inc. Gladiator Athletic Lockers
Rigid Door Construction Doors feature a full 1” (25 mm) thick double pan box design (16-gauge outer / 18-gauge inner) for outstanding rigidity and durability....
