The technical requirements for transfer supports is in M305.2 of the final rule and has been reorganized to mirror the two types of transfer surfaces (end and side) in the final rule for...
Search Results "End-Opening Door"
-
M302.3.1 Transfer Supports (Section-by-Section Analysis)
-
11B-809.7.1 Width
Exception: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum at doors....
-
11B-809.7.1 Width
Exception: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum at doors....
-
Flush Controls: ADA Standard Section 604.9.5
Section 604.9.5 covers the current ADA Standards for flush controls on children's use water closets.
-
M303.2.3.1 Front or Rear Entry
Where wheelchair space entry and exit is provided at only one end (front or rear) the wheelchair space shall be 48 inches (1220 mm) deep minimum....
-
1. Is this trail designed and managed predominantly as a pedestrian/hiker trail?
Yes No If “No” is selected, then skip to “End of Survey” (Qualtrics Option). If “Yes is selected, then skip to Question #2....
-
§ 37.213(b)(2)(i)
The operator shall transmit the form no later than the end of the next business day following the request for equivalent service;...
-
Expert Report of Jeromy G. Murphy, American Construction Investigations, LTD (August 6, 2018)
Building Entrance: One side of the double leaf doors at the designated accessible entrance does not provide at least 32 inches clear passage width when the door is open 90 degrees (1991...
-
Magnuson Group RETTO Outdoor Waste Receptacle
Constructed of steel plate finished in textured bronze paint, RETTO features a generous access opening, a locking front door and an internal galvanized liner....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
-
5.4.1.1 Transfer Support Location Recommendation for Stretchers
Rationale for the recommendation Patients access stretchers on either of the long sides rather than on its end (short side)....
-
C. TRAINING
At the end of that period, Lewisboro will submit a copy of its training curriculum and materials to the U.S....
-
1.1.7 Measurement of parking areas
This means that the overall slope in the long dimension should be measured along the center of the aisle or zone using the ends of the area as elevation measuring points and cross slope...
-
11B-812.8.7 Location
Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected vehicle space width at the head end of the vehicle space....
-
11B-812.8.7 Location
Signs shall be permanently posted either immediately adjacent to the vehicle space or within the projected vehicle space width at the head end of the vehicle space....
-
M303.2.3.2 Pass Through Entry
Where wheelchair space entry and exit permits pass through from one end to the other, the wheelchair space shall be 40 inches deep (1015 mm) minimum....
-
§ 1194.25(a)
(a) Self contained products shall be usable by people with disabilities without requiring an end-user to attach assistive technology to the product. ...
-
R309.2.1.1 Alterations
In alterations where the street or sidewalk adjacent to the parking spaces is not altered, an access aisle shall not be required provided the parking spaces are located at the end of the...
-
14. In § 38.93(d)(3)
In § 38.93(d)(3), remove the period at the end of the paragraph and add the following words: “,ensuring compliance with section 37.42, where applicable.” in its place....
-
§100.7(a)(1)(ii)
(ii) Failing to take prompt action to correct and end a discriminatory housing practice by that person's employee or agent, where the person knew or should have known of the discriminatory...
-
F104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
b) Accessibility
However, for safety reasons, many of those doors had a greater opening pressure because fire doors are permitted to have a greater amount of pressure. RT 2098:11-16....
-
§ 38.73(a)(1)
(1) All passenger doorways on vehicle sides shall have minimum clear openings of 32 inches when open....
