Technical provisions address the width, slope, and surface of both ground level and elevated accessible routes....
Search Results "Slope Meter"
-
Accessible Routes
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Parking Spaces [4.6.3]
A maximum slope of 2% is required in all directions for both the space and access aisle since level surfaces are important for wheelchair transfer to and from vehicles....
-
G. Other types of equipment and furniture
equipment and furniture exists that may provide ready access for individuals with disabilities, including pool chairs that permit individuals who use wheelchairs to enter a pool with a sloped...
-
11B-705.1.2.2.2.2 Two entrance/exit points
Where the turning space has two entrance/exit points other than the sloped ramp segments, detectable warnings shall be 36 inches (914 mm) deep at both entrance/ exit points, as measured...
-
DEL Motorized Solutions Motorized Vertical Shades
This system also has an available option of being mounted in a sloped installation (sizes may vary)....
-
Whitehall Mfg. Ligature Resistant Toilet Top Supply On-Floor
To comply with Ligature-Resistant needs, an optional sloped top cover (box) with a Top Supply flush valve is available....
-
What surface characteristics are required of an accessible route?
Because of the great number of variables that affect the performance of a given walking surface--its slope and cross-slope, its material, texture and finish, the presence of moisture or...
-
206.2.1 Site Arrival Points
(1) Newly constructed or altered streets, roads, and highways must contain curb ramps or other sloped areas at any intersection having curbs or other barriers to entry from a street...
-
Alterations to Existing Facilities
For example, if a new bench is installed on a sidewalk that has a cross slope exceeding 2 percent, the sidewalk is not required to be altered to reduce the cross slope because the bench...
-
Trailhead Signs
Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum trail grade Typical and maximum trail cross slope...
-
Manual vs. Power (RMS Values)
The different slopes of the linear trend lines show that manual WCs will have a greater increase in vibrations for a particular increase in surface roughness than power WCs....
-
Future Work
It will also be able to determine other surface characteristics such as cross-slope, running slope, and instantaneous height changes which have limits already established in the ADAAG....
-
Abstract
The results of this research suggest that the percentage of the population that can successfully negotiate 5% slopes for longer distances would be similar to the percentage that can negotiate...
-
Accessible Entrance
When a ramp is added to provide an accessible entrance, the slope of the ramp should be as shallow as possible but not more than 1:12....
-
Fire Rings, Grills, Fireplaces, and Wood Stoves
The slope of the clear floor or ground space must not exceed 1:48 (2 percent) in any direction....
-
Camp Shelters
Ensure that the surface of the clear floor or ground space at the open entrance side of the shelter and the floor of the shelter is firm, stable, and does not slope more than 2 percent (...
-
Salsbury Industries See Through Metal Locker
Requires the Registered User plan or above. Login! -
11B-604 Water closets and toilet compartments
INTERPRETATION Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope of ¼ inch per foot to a drain (refer to CPC Section 408.5 and CBC Section...
-
Elements in the 2010 ADA Standards Not in the 1991
For example, a hotel must determine whether it is readily achievable to make its swimming pool accessible by installing a lift, a sloped entry or both as specified in the 2010 Standards....
-
Construction Specification Institute
Construction Specification Institute While developing suggested tolerances for surface materials, the Construction Specifications Institute developed a suggested method for measuring ramp slopes...
-
D. What Does Title II of the ADA Require with Respect to Curb Ramps at Pedestrian Crossings?
To comply with ADA requirements, the curb ramps provided must meet specific standards for width, slope, cross slope, placement, and other features.3 In constructing facilities such as walkways...
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
Deficiencies (excessive running slope, cross slope, change in level, or openings) for PIP, TIL and HYB began to emerge 24-36 months after installation....
-
5.8.2.7 Base Support Allowance Recommendation
The Committee also discussed adding an allowance for a sloped region at the base of the gantry....
