Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
Search Results "Horizontal Exit"
-
1010.1.6 Thresholds
-
903 Benches
rule required back support to be provided that extends vertically from a point no more than 2 inches above the bench to a height of at least 18 inches above the bench and that extends horizontally...
-
Trail Slopes
Slopes are often described as a ratio of vertical distance to horizontal distance, or rise to run (figure 130)....
-
M305.2.2 Length (Section-by-Section Analysis)
The second commenter, a manufacturer, recommended revising the proposed provision from requiring the transfer support to extend horizontally the entire depth of the transfer surface, to...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Handrails
[ADA Stds. 4.9] Yes __ No __ N/A __ Comments: ___________________________________________ ...do the handrails extend horizontally at the top and bottom of each stair section to give...
-
4.4.3 Backrest and Armrest
strength of backs, armrests, and mounting devices shall comply with section 903.6 of the ABAAS, which states: “Allowable stresses shall not be exceeded for materials used when a vertical or horizontal...
-
Rotational Penetrometer
The test for stability requires the caster of the Rotational Penetrometer to be moved from side to side to determine the horizontal displacement of the surface material....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of 1/2 inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
1010.1.5 Floor elevation
Landings shall be level except for exterior landings, which are permitted to have a slope not to exceed 0.25 unit vertical in 12 units horizontal (2-percent slope)....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
1. Location
where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people with disabilities to board and exit...
-
Vertical Clearance [4.6.5]
In garages, at least one vehicular route connecting van spaces to entrances and exits must provide this clearance; van spaces can be clustered on one level....
-
2. a. iv. Path-of-Travel (wheelchair) space allowances
If a 180° turn is needed to exit an area, then a 60” diameter turning space or a 36” wide "T" is needed (see Figure 11)....
-
General [5.1]/ Access Aisles [5.3]
Space should also be available so that people using wheelchairs do not obstruct required exit and circulation routes....
-
HEWI Hinged Support Rail Duo
This rail provides not only horizontal but also vertical gripping options and supports the movement sequences effectively....
-
Sargent HP Bored Lock with Push/Pull Trim
Features: Paddle trim can be mounted in horizontal (up or down) or vertical (sideways) orientations in the field Easy installation 15 function trim is non-handed; lockbody is easily...
-
Landscape Forms Inc. Parc Vue Bench Collection
Horizontal strap seat. backed or backless 72" length Optional end arms for backed bench, factory welded to end frame....
-
Mockett PCS49B Rectangular Power Grommet
With a flat, horizontal face that sits slightly above the desktop, this model is ideal for workstations that require heavy usage but still want to maintain a streamlined look....
-
Elevator Doors
The proposed rule recognized horizontal sliding doors....
-
§ 38.159(b)(7) Platform gaps
is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch (13 mm) horizontally...
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
Does the white stringer help you identify where each of those steps is, having a contrast color for the vertical on the sides versus the horizontal of the tread?...
