- made of environmentally friendly, chrome-look coated polyamide - with a horizontal, round gripping level - loading capacity 220Lbs. (100 kg) (accessible to DIN 18040) - with corrosion...
Search Results "Horizontal Exit"
-
HEWI Stationary Support Rail Mono WARM TOUCH
-
3.13(c) Companion Seating
Wheelchair locations and companion seats shall be aligned horizontally so that they are shoulder-to-shoulder with each other and with other seats in the same row....
-
B. Measuring Clear Passage at Doors
The photo below shows that you measure horizontally from the face of the door in its 90 degree open position to the surface of the door stop on the frame opposite the hinge....
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
10.3.1(5)
on the side opposite from boarding) each shall have the top of the highest letter or symbol below the top of the vehicle window and the bottom of the lowest letter or symbol above the horizontal...
-
§ 38.83(b)(7) Platform gaps
When the lift is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and vehicle floor shall not exceed 1/2 inch horizontally...
-
§ 38.23(b)(7) Platform gaps
platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch horizontally...
-
11B-602.9 Pedestrian protection
When used, wing walls or barriers shall project horizontally at least as far as the drinking fountain and to within 6 inches (152 mm) vertically from the floor or ground surface....
-
Signs
Signs • Signs that identify permanent rooms and spaces, such as those identifying rest rooms, exits or room numbers, must have Braille and raised letters or numbers so that they may be...
-
907.2.6 Group I
Exception: Manual fire alarm boxes in patient sleeping areas of Group I-1 and I-2 occupancies shall not be required at exits if located at all nurse’s control stations or other constantly...
-
1003.2.13.5.4 Instructions
Persons able to use the exit stairway do so as soon as possible, unless they are assisting others. 3....
-
1132A.8 Hand-activated door hardware
Locked exit doors shall operate consistent with Section 1132A.6, in the direction of egress....
-
1132A.8 Hand-activated door hardware
Locked exit doors shall operate consistent with Section 1132A.6, in the direction of egress....
-
R410.6 Character Height
Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
-
1134A.6 Showers
When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal (26.6 degrees from...
-
General: ADA Standard Section 410.1
Section 410.1 of the ADA Standards covers information in the current ADA Standards for platform lifts.
-
Seton Custom SetonGlo™ Floor & Stair Identification Signs AV0154
NFPA and ASTM safety standards recommend that identification be posted on Exit doors leading to a staircase SetonGLo Custom 6"W x 6"H photoluminescent signs identify stairs and floor...
-
Norton Surface Mounted Series 5600 Hands-Free Door Operation Kits
The NORTON 5600 Series Hands-Free Kits combine a wave-to-open switch with the 5600 power operator to open the door and provide a ‘clean’ exit without touching hardware....
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
Features & Benefits: Heavy pedestrian / Heavy vehicular loading capabilities Appropriate for horizontal applications Comprised of Neoprene Rubber: Superior movement...
-
HEWI Hinged Support Rail Mono WARM TOUCH
- made of environmentally friendly, chrome-look coated polyamide - with a horizontal, round gripping level - loading capacity 220Lbs. (100 kg) (accessible to DIN 18040) - can be folded...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
903 Benches
rule required back support to be provided that extends vertically from a point no more than 2 inches above the bench to a height of at least 18 inches above the bench and that extends horizontally...
