Viewing distance shall be measured as the horizontal distance between the character and an obstruction preventing further approach towards the sign....
Search Results "Horizontal Exit"
-
11B-703.8.4 Character height
-
Standing Supports (M304.3 and M305.3)
M305.3 also provides technical criteria for standing supports in horizontal and vertical positions....
-
Inpro Corporation JointMaster® DR Series Seal Expansion Joint Systems
Features & Benefits: Heavy pedestrian / Heavy vehicular loading capabilities Appropriate for horizontal applications Comprised of Neoprene Rubber: Superior movement...
-
HEWI Hinged Support Rail Mono WARM TOUCH
- made of environmentally friendly, chrome-look coated polyamide - with a horizontal, round gripping level - loading capacity 220Lbs. (100 kg) (accessible to DIN 18040) - can be folded...
-
Takeform Fusion Signage Evacuation Map Type D
Locations: Elevator Stairwell exits Hotel rooms Classrooms Type D 9.5"w x 17.75"h Insert Size: 8.5"w x 14"h...
-
1. Standing Supports
the other to provide a standing support on only one side of the standing surface, provided that the standing support complies with the requirements in M305.3 for standing supports in a horizontal...
-
Gaps
coordinated with the floors of the load and unload areas so that when the ride is at the load and unload position, the vertical differences between the two floors are within 5/8 inch and the horizontal...
-
R409.6 Gripping Surface
Where provided, horizontal projections shall occur 38 mm (1.5 in) minimum below the bottom of the handrail gripping surface. Advisory R409.6 Gripping Surface....
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head and foot end of the bed....
-
Is there a minimum distance between changes in level?
The standards do not require a minimum horizontal separation between changes in level of a ½” or less....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and...
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head and foot end of the bed....
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend to points horizontally 30 inches (762 mm), vertically 7 inches (178 mm) and not more than 12 inches (305 mm) from the head and foot end of the bed....
-
1132A.5.2 Strike edge maneuvering space at doors
The width of the level area at the exterior side of the primary entry door and any required exit doors shall comply with Section 1126A. Notes: 1. ...
-
20. Does topping off a play surface trigger its replacement with an accessible surface?
Changing the surface type or replacement of the surface would require an accessible surface along accessible routes located within the boundary of the play area, including the entry and exit...
-
7. Should overhead play components such as track riders, ring ladders, monkey bars, and chin up bars be lowered to the recommended reach ranges?
Overhead play components that are required to have their entry and exit points connected by an accessible route are not required to be lowered to be considered accessible....
-
1007.6.4 Instructions
Persons able to use the exit stairway do so as soon as possible, unless they are assisting others....
-
USE OF THE WAY
Once notified, people who are deaf or hard of hearing can read and follow standard exit and directional signs and use any standard means of egress from the building....
-
Multiple Usable Entrances
Several commenters noted that the Guidelines do not provide more than one accessible entrance/exit, and that without a second means of egress, wheelchair users may find themselves in danger...
-
Security Bollards [7.4] and Security Devices
Security Devices Bollards and rails used to keep shopping carts on the premises must allow an accessible clear passage (32 inches wide minimum) along at least one route for entry and exit...
-
Work Areas
at a work station (janitor closets) or as part of a work area (stockroom shelves) are not required to comply (although work areas must be on an accessible route for approach, entry, and exit...
-
4.1.6(1)(b)
., escalator) is planned or installed where none existed previously, or if new stairs (other than stairs installed to meet emergency exit requirements) requiring major structural changes...
-
Prohibition of Discriminatory Practices
FAA's rule on exit row seating says that airlines may place in exit rows only persons who can perform a series of functions necessary in an emergency evacuation....
-
1133B.2.5.2
SECTION 1133B GENERAL ACCESSIBILITY FOR ENTRANCES, EXITS AND PATHS OF TRAVEL 1133B.2 Doors. 1133B.2.5.2 Hand-activated door opening hardware, handles, pulls, latches, locks and...
