In order to be considered part of an accessible means of egress, a stairway between stories shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
Search Results "Minimum Dimension"
-
1009.3 Stairways
-
11B-213.3.1 Toilet compartments
Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment. ...
-
11B-706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
11B-606.2 Clear floor space
A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or...
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The minimum percentage of ground floor units required on an accessible route shall equal the percentage of the total buildable area (not restricted-use areas, flood plains or wetlands) of...
-
Issue 1: APS volume
In most devices, the pushbutton locator tone volume and the WALK indication volume are set separately, and each has a minimum/maximum range....
-
B. Major Provisions
Third, the rule requires movie theaters to have a minimum number of fully operational captioning devices [3] and to provide them to patrons upon request....
-
2. Equipment Clearances for Breast Platforms
The proposed rule included a requirement that 17 inches minimum and 25 inches maximum of the 48-inch wheelchair space depth include knee and toe clearance....
-
4.2 Stretchers
With these essential features competing for the same vertical space, current stretchers cannot lower to the desired minimum height of 17" to 19" (see Sections 5 and 6)....
-
John Brabyn, Ph.D., Director of Rehabilitation Engineering Research, Center on Low Vision and Blindness (NIDRR), Smith-Kettlewell Eye Research Institute
JMU Publication (slides 70 – 74) Bollards should be a minimum of 1 m high, and color contrasted with the background against which they will be viewed....
-
Chapter 1: Background
These guidelines establish minimum accessibility requirements to provide a general level of usability for people with disabilities....
-
1.5. Major Provisions of Final Rule
Third, movie theaters must maintain a minimum number of fully operational captioning devices and provide them to patrons upon request. ...
-
RESEARCH NEEDS
Research is needed to determine the minimum number of signal faces necessary to achieve high driver compliance....
-
1134A.2 Number of complying bathrooms
A minimum 18-inch (457 mm) clear maneuvering space shall be provided on the swing side of the door at the strike edge of the door....
-
4.3 Reach Ranges
The reason for the very low 5th percentile and minimum values in the IDEA study is that several individuals’ reach envelope only intersected the anterior most plane at the extended part...
-
ASTM: ADA Standard Section 105.2.3
Section 105.2.3 of the ADA Standards cover references to the American Society for Testing and Materials (ASTM) standards.
-
4. Passenger Information
For instance, this final rule requires carriers through their reservation agents to inform passengers of the maximum weight and dimensions of a device that can be accommodated in the aircraft...
-
Base Support [No specific provision—affects M303.2.4]
Summary Figure: Figure 12 shows the final recommended component dimensions in one diagram. Figure 12....
-
Compliance date
A substantial number of commenters advocated a minimum of 18 months from publication of the final rule to the effective date for application of the standards to new construction, consistent...
-
How is slip resistance measured?
Measuring slip resistance involves the minimum tangential force necessary to initiate sliding of a body over the surface and the body gravity force....
-
Compliance date. (Section-by-Section Analysis)
A substantial number of commenters advocated a minimum of 18 months from publication of the final rule to the effective date for application of the standards to new construction, consistent...
-
Corada Pro FAQ's
We crafted an inclusive user experience and developed all content and features using the Web Content Accessibility Guidelines (WCAG) with Level A compliance at a minimum and Level AA where...
-
Allegion aptiQ MTK15 Multi-Technology Single-Gang Keypad Reader
Range: Proximity--Up to 5" MIFARE--Up to 4" MIFARE DESFire EV1--Up to 2" PIV Credential--Up to 2.5" Weight: 9.1 oz Dimensions...
