seat options Steel Reinforced arm rests Standard Lap Belts Optional 4-point Harness Fasteners: Stainless Steel fasteners used in every possible location Stainless Sealed Bearings Dimensions...
Search Results "Minimum Dimension"
-
Outdoor Extreme Mobility Nomad All Terrain Power Wheelchair
-
Alertus Alert Beacons®
Communication Capable: Receives notifications from the on-premise server through one or multiple pathways: Ethernet (standard), WiFi, FM Radio Subcarrier, or RF Paging Specs Dimensions...
-
Viking Electronics AES-2000 Entry System
Gasketing behind lens, speaker, keypad and perimeter of front panel Sealed switches and keypad SPECIFICATIONS: Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided Dimensions...
-
Overview
For the first time, the 2010 Standards set minimum requirements for making swimming pools, wading pools, and spas (pools) accessible....
-
E. Training
PSAPs should require or offer refresher training at least as often as they require or offer training for voice calls, but at a minimum, every six months....
-
Serving Counters
A minimum width of 36 inches should be provided with a 42 inch width preferred, if readily achievable....
-
3.12 Other Modified Theaters
Tinseltown 14, Ogden, Utah: Auditoria 3 and 4. 3.12.4 In each of the auditoria listed below Cinemark will provide wheelchair spaces that comply with the minimum size required by Standard...
-
11B-404.2.4.1 Swinging doors and gates
TABLE 11B-404.2.4.1 MANEUVERING CLEARANCES AT MANUAL SWINGING DOORS AND GATES TYPE OF USE MINIMUM MANEUVERING CLEARANCE Approach...
-
11B-221.3 Companion seats
When designing, best practice is to locate wheelchair spaces in rows where seating for a minimum of four is provided....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Fire Rings, Grills, Fireplaces, and Woodstoves [1011.2, 1011.3, and 1011.5]
A minimum of 48 by 48 inches of clear ground space must be provided on all usable sides of fire rings, grills, fireplaces, and woodstoves....
-
R211 Signs (Section-by-Section Analysis)
transit signs provided in the public right-of-way. 37The 2004 ADA and ABA Accessibility Guidelines also do not require bus route signs to comply with the technical requirements for minimum...
-
T504 Fare Collection Devices
Under the 2016 Non-Rail Vehicle Guidelines, operable parts may be located at any point within the specified range of 24 inches minimum and 48 inches maximum....
-
CASI Accessibility Construction Inspection Checklist
It is important during the progress inspections that the building inspector verify all elements will be able to meet the minimum accessibility requirements of the California Building Code...
-
CALBO Accessibility Construction Inspection Checklist
It is important during the progress inspections that the building inspector verify all elements will be able to meet the minimum accessibility requirements of the California Building Code...
-
3.3.3 Clear Floor Width
Due to recent revisions, the minimum required clear floor width standard in Australia and the U.K. now exceeds that in U.S. and Canada (Figure 3‒3)....
-
220 Automatic Teller Machines and Fare Machines
Accessible fare collection devices shall have a minimum clear opening width of 32 inches; shall permit passage of a wheelchair; and, where provided, coin or card slots and controls necessary...
-
Types of Alternative Designs
Types of Alternative Designs All of the participants responded that their firms had designed facilities that incorporated bathroom designs that deviated from, or went beyond the minimum...
-
4.1.1(5)
both, then accessible spaces, complying with 4.6, shall be provided in each such parking area in conformance with the following table: Total Parking in Lot Required Minimum...
-
11B-221.3 Companion seats
When designing, best practice is to locate wheelchair spaces in rows where seating for a minimum of four is provided....
-
11B-221.3 Companion seats
When designing, best practice is to locate wheelchair spaces in rows where seating for a minimum of four is provided....
-
11B-208.3.1 General
The minimum number of spaces must still be determined separately for each facility even if the spaces are to be provided in other facilities or locations....
-
11B-805.7 Built-in cabinets and work surfaces
Clinical laboratory work stations provided in a laboratory area that are in addition to the minimum number required to be accessible (5 percent of the work stations provided, but no fewer...
-
11B-213.3.1 Toilet compartments
Full-height partitions and door assemblies can comprise toilet compartments where the minimum required spaces are provided within the compartment. ◼ ETA Editor's Note With the...
