A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or...
Search Results "Minimum Dimension"
-
606.2 Clear Floor Space
-
606.2 Clear Floor Space
A knee clearance of 24 inches (610 mm) minimum above the finish floor or ground shall be permitted at lavatories and sinks used primarily by children 6 through 12 years where the rim or...
-
706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
706.1 General
The technical standards for assistive listening systems describe minimum performance levels for volume, interference, and distortion....
-
Automatic Doors
comments opposed this requirement because of a common accessibility retrofit in which 60 inch wide double doors are automated so that both 30 inch leaves open simultaneously to meet the minimum...
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
This exception permits the profile of base components to extend into the wheelchair space at a height of 1½ inches maximum between 17 inches minimum and 25 inches maximum in depth measured...
-
Introduction
The scoping and technical requirements are minimum requirements....
-
3.3.2 Experienced Clinicians
The Committee is considering two main options: minimum widths of 28” or 30”. “Tables” are equipment used by patients in supine, prone, or side-lying positions....
-
Alterations and water closet clearances in single-user toilet rooms with in-swinging doors. (Section-by-Section Analysis)
The 1991 Standards allow a lavatory to be placed a minimum of 18 inches from the water closet centerline and a minimum of 36 inches from the side wall adjacent to the water closet, which...
-
General: ADA Standard Section 233.1
Section 233 of the ADA Standards covers information in the current ADA Standards on scoping requirements for residential facilities.
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-208.2.1 Hospital outpatient facilities
A local zoning code that requires a minimum number of parking spaces according to occupancy type and square footage may be an appropriate guide in assessing the number of spaces in the lot...
-
11B-208.2.1 Hospital outpatient facilities
A local zoning code that requires a minimum number of parking spaces according to occupancy type and square footage may be an appropriate guide in assessing the number of spaces in the lot...
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
11B-240.2.1 Ground level play components
Ground level play components that are provided to comply with Section 11B-240.2.1.1 shall be permitted to satisfy the additional number required by Section 11B-240.2.1.2 if the minimum required...
-
11B-240.2.1 Ground level play components
Ground level play components that are provided to comply with Section 11B-240.2.1.1 shall be permitted to satisfy the additional number required by Section 11B-240.2.1.2 if the minimum required...
-
Savaria Orion Limited Use/Limited Application Elevator
1:2 cable hydraulic drive system with gradual acceleration and deceleration, makes for a smooth ride Quiet operation from submersed pump and motor Pit depth of 14" (355 mm) and minimum...
-
Origin Instruments Corporation HeadMouse® Extreme Wireless Head Controlled Mouse
Resolution of the HeadMouse is precise to allow a user to control the mouse pointer down to the minimum, pixel perfect, resolution of the computer display....
-
B. The ADA Standards for Accessible Design
They establish the minimum scoping and technical requirements for a facility or part thereof to be “readily accessible to and usable by individuals with disabilities.” 2010 Standards, Overview...
-
Wagner Instruments Chatillon® DFE Digital Force Gauge
Accuracy Accurate to ± 0.25% of Full Scale, ± 1 Least Significant Digit Weight & Dimensions 1.5 lb [0.7 kg], Shipping Weight: 3 lb [1.4 kg]. 7'' [180mm...
-
Allegion aptiQ Multi-Technology Single Gang Reader
Read Range: Proximity--Up to 5" MIFARE--Up to 4" MIFARE DESFire EV1--Up to 2" PIV Credential--Up to 2.5" Weight: 9.1 oz Dimensions...
-
Table of Contents
ABA CHAPTER 1: APPLICATION AND ADMINISTRATION F101 Purpose F102 Dimensions for Adults and Children F103 Modifications and Waivers F104 Conventions F105 Referenced Standards...
-
3.3.16 Door Use
One interesting finding, however, was that “Closing” trials were more likely to be rated as “minimum effort” for door 2 than door 1, despite door 2 being 215 mm (8.5 in.) wider than door...
