TABLE 11B-404.2.4.1 MANEUVERING CLEARANCES AT MANUAL SWINGING DOORS AND GATES TYPE OF USE MINIMUM MANEUVERING CLEARANCE Approach...
Search Results "Minimum Dimension"
-
11B-404.2.4.1 Swinging doors and gates
-
11B-702.1 General
except that the maximum allowable sound level of audible notification appliances complying with section 4-3.2.1 of NFPA 72 (1999 edition) shall have a sound level no more than 110 dB at the minimum...
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
A. Section 504
regulation, the design, construction, or alteration of buildings in conformance with UFAS is deemed to be in compliance with the accessibility requirements of Section 504.6 UFAS is based on the minimum...
-
General: ADA Standard Section 233.1
Section 233 of the ADA Standards covers information in the current ADA Standards on scoping requirements for residential facilities.
-
Ground Level Play Components: ADA Standard Section 240.2.1
Section 240.2.1 covers scoping requirements in the current ADA Standards for ground level play components.
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
11B-208.2.1 Hospital outpatient facilities
A local zoning code that requires a minimum number of parking spaces according to occupancy type and square footage may be an appropriate guide in assessing the number of spaces in the lot...
-
11B-240.2.1 Ground level play components
Ground level play components that are provided to comply with Section 11B-240.2.1.1 shall be permitted to satisfy the additional number required by Section 11B-240.2.1.2 if the minimum required...
-
11B-208.2.1 Hospital outpatient facilities
A local zoning code that requires a minimum number of parking spaces according to occupancy type and square footage may be an appropriate guide in assessing the number of spaces in the lot...
-
11B-240.2.1 Ground level play components
Ground level play components that are provided to comply with Section 11B-240.2.1.1 shall be permitted to satisfy the additional number required by Section 11B-240.2.1.2 if the minimum required...
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
Automatic Doors
comments opposed this requirement because of a common accessibility retrofit in which 60 inch wide double doors are automated so that both 30 inch leaves open simultaneously to meet the minimum...
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
This exception permits the profile of base components to extend into the wheelchair space at a height of 1½ inches maximum between 17 inches minimum and 25 inches maximum in depth measured...
-
Introduction
The scoping and technical requirements are minimum requirements....
-
3.3.2 Experienced Clinicians
The Committee is considering two main options: minimum widths of 28” or 30”. “Tables” are equipment used by patients in supine, prone, or side-lying positions....
-
Alterations and water closet clearances in single-user toilet rooms with in-swinging doors. (Section-by-Section Analysis)
The 1991 Standards allow a lavatory to be placed a minimum of 18 inches from the water closet centerline and a minimum of 36 inches from the side wall adjacent to the water closet, which...
- citEcar ADA Electric Shuttle 11P 1WC
- Pilot Rock PQT3-4 Square Pedestal Table - Expanded or Perforated Steel
- Detecto 6550 Portable Wheelchair Scale
- Detecto BRW1000 Portable Wheelchair Scale
- Mannington Mills Allegiant Collection Commercial Carpet
- Allegion aptiQ MT11 Multi-Technology Mullion Reader
- citEcar ADA Enclosed Shuttle 11P 1WC