As required in ABAAS, section 307.2, do not allow projections into the clear opening width between the trail surface and 27 inches (685 millimeters) above the trail surface....
Search Results "Side Transfer Surface"
-
Gates and Barriers
-
F232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
232.5.1 Cubicles and Counters
At least 5 percent, but no fewer than one, of cubicles shall comply with 902 on both the visitor and detainee sides....
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
- HeavenDropt
-
Compartment Doors
Comments suggested that an alternate location in the side partition farthest from the water closet should be allowed, consistent with the original ADAAG....
-
502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for angled van parking spaces which shall have access aisles located on the passenger side of the...
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
1.6.9 Federal Financial Assistance.
Transfers or leases of such property for less than fair market value or for reduced consideration; and b....
-
§104.3(h) Federal financial assistance
available assistance in the form of: (1) Funds; (2) Services of Federal personnel; or (3) Real and personal property or any interest in or use of such property, including: (i) Transfers...
-
M101.3 Equivalent Facilitation
Generally, alternative designs or technologies that rely on assisted transfer only (e.g., use of a patient lift) are not permitted because they do not provide for independent access to and...
- Willoughby Industries 2260 AquaDeck Lavatory Deck Contoured Front
-
11B-604.8.1.2 Doors
A door pull complying with Section 11B-404.2.7 shall be placed on both sides of the door near the latch....
-
Chapter of Design Explains Why 20 mm Marble is a Top Choice
It gives a rich look, strong surface, and better support for flooring, walls, and premium design areas....
-
How to Steam Milk for Latte Art in 5 Minutes or Less?
Start with cold milk and a chilled pitcher, then position the steam wand just below the surface to introduce air for a few seconds, creating a light, silky foam....
-
1630.4(b)
(b) Hiring, upgrading, promotion, award of tenure, demotion, transfer, layoff, termination, right of return from layoff, and rehiring;...
-
§104.11(b)(2)
(2) Hiring, upgrading, promotion, award of tenure, demotion, transfer, layoff, termination, right of return from layoff and rehiring;...
-
§1630.4(a)(1)(ii)
(ii) Hiring, upgrading, promotion, award of tenure, demotion, transfer, layoff, termination, right of return from layoff, and rehiring;...
-
Height Above Finish Floor or Ground: ADA Standard Section 703.4.1
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
11B-801.1 Scope
For example, Section 11B-806 addresses guest rooms in transient lodging facilities while Section 11B-902 contains the technical specifications for dining surfaces....
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
11B-405.9.2 Curb or barrier
or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground surface...
-
Sharing an Access Aisle
The proposed rule, consistent with the original ADAAG, allowed access aisles to be provided on either side of the parking space....