Product Features Fabricated of #20 gauge stainless steel with #4 satin finish A refill indicator displays remaining product Holds 45 fl oz. of liquid soap or hand...
Search Results "Side Transfer Surface"
-
AJW Architectural Products U125 45 oz. Horizontal Liquid Soap Dispenser - Surface Mounted
-
AJW Architectural Products U155 24 oz. Vertical Liquid Soap Dispenser - Surface Mounted
Product Features Globe is translucent, shatterproof and corrosion resistant molded polyethylene Fabricated of highly polished chrome plated ABS material Holds 24 oz. of...
-
AJW Architectural Products U116 16 oz. ABS Liquid Soap Dispenser - Surface Mounted
Product Features Spout is finished with highly polished chrome on brass Globe is tanslucent, shatterproof and corrosion resistant molded polyethylene Concealed mounting...
-
American Specialties Roval™ Collection Surface Mounted Seat Cover Dispenser 20477-SM
Dispenses 250 seat covers. Fabricated of 20 gauge type 304 stainless steel with a satin finish.
-
AJW Architectural Products US11 Security Toilet Tissue Holder, Exposed Mounting - Surface Mounted
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Holds one standard toilet tissue roll Unit is designed for security applications Product...
-
11B-604.8.2.3 Grab bars
A side-wall grab bar complying with Section 11B-604.5.1 shall be provided on both sides of the compartment....
-
805.3 Clear Floor or Ground Space
A clear floor space complying with 305 shall be provided on each side of the bed. The clear floor space shall be positioned for parallel approach to the side of the bed....
-
608.2.3 Alternate Roll-In Type Shower Compartments
Alternate roll-in type shower compartments shall be 36 inches (915 mm) wide and 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
11B-231.4.1 Cubicles and counters
At least 5 percent, but no fewer than one, of cubicles shall comply with Section 11B-902 on both the visitor and detainee sides....
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
11B-231.4.1 Cubicles and counters
At least 5 percent, but no fewer than one, of cubicles shall comply with Section 11B-902 on both the visitor and detainee sides....
-
11B-232.5.1 Cubicles and counters
At least 5 percent, but no fewer than one, of cubicles shall comply with Section 11B-902 on both the visitor and detainee sides....
-
608.2.2.1 Clearance
EXCEPTION: A lavatory complying with 606 shall be permitted on one 30 inch (760 mm) wide minimum side of the clearance provided that it is not on the side of the clearance adjacent to the...
-
Elevated Play Components
A transfer system or ramps may connect the other elevated play components required on an accessible route....
-
Hill-Rom Likorall™ 242 S Overhead Lift
The motor’s 200 cm (79 inches) lifting interval handles lifts from the floor in most environments, and the system can be equipped with a special carriage for easy room-to-room transfers....
-
4.34.6.7* OVENS
For side-opening ovens, the door latch side shall be next to the open counter space, and there shall be a pull-out shelf under the oven extending the full width of the oven and pulling out...
-
406 Curb Ramps
These include specifications for running slope, surface, clear width, and wet conditions. Consistent with the scope of the guidelines, these requirements apply to facilities on sites....
-
Passing Spaces on Trails
A T-intersection of two trails or other walking surfaces also may be used as a passing space if the arms and stem of the T-shaped space extend at least 48 inches (1,220 millimeters) beyond...
-
R404 Clear Spaces (Section-by-Section Analysis)
Additional maneuvering space must be provided where an element is confined on all or part of three sides....
-
1134A.7, Item 2
Where the water closet is not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall have provisions for installation of floor-mounted, foldaway or similar...
-
1134A.7, Item 2
Where the water closet is not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall have provisions for installation of floor-mounted, foldaway or similar...
-
404.2.4.2 Doorways without Doors or Gates
unless noted) From front 48 inches (1220 mm) 0 inches (0 mm) From side 1 42 inches (1065 mm)...
-
11B-807.2.3 Beds
Where beds are provided, clear floor space complying with Section 11B-305 shall be provided on at least one side of the bed....
-
Approach and Maneuvering Clearance [§305.6 and §305.7]
Approach and Maneuvering Clearance [§305.6 and §305.7] Where the space is obstructed on both sides for more than half the depth, additional clearance is required for maneuvering....
