John, I cannot find anything that says that benches in bus shelters must comply with the bench requirements in 903. ...
Search Results "Bus Loading Zone"
Filters
Commonly Searched Documents
-
Bus Shelter Benches
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
Load and Unload Areas
Load and Unload Areas The floor or ground surface in the load and unload areas must have a slope not steeper than 1:48 and be stable, firm, and slip resistant....
-
§ 38.37(a)
(a) Where passengers may board or alight at multiple stops at their option, vehicles in excess of 22 feet in length shall provide controls adjacent to the securement location for...
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
§ 38.23(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds....
-
206.2.9.1 Load and Unload Areas
206.2.9.1 Load and Unload Areas. Load and unload areas shall be on an accessible route....
-
F206.2.8.1 Load and Unload Areas
Load and unload areas shall be on an accessible route....
-
206.2.9.1 Load and Unload Areas
Load and unload areas shall be on an accessible route....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
§ 38.151(b)
(b) Over-the-road buses covered by §37.7 (c) of this title shall comply with §38.23 and this subpart.
-
234.4.1 Load and Unload Areas
234.4.1 Load and Unload Areas. Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
11B-206.4.10 Medical care and long-term care facilities
The area of weather protection shall include the passenger drop-off and loading zone complying with Section 11B-209.3 and the accessible route from the passenger loading zone to the accessible...
-
11B-206.4.10 Medical care and long-term care facilities
The area of weather protection shall include the passenger loading zone complying with Section 11B-209.3 and the accessible route from the passenger loading zone to the accessible entrance...
-
1002.3 Load and Unload Areas
1002.3 Load and Unload Areas. A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
F234.4.1 Load and Unload Areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
234.4.1 Load and Unload Areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
Section 810.2.2
For example, a bus driver could position the bus at a nearby point—even if not the precise location of the designated stop—so that a passenger needing a lift or ramp to get on or off the...
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....