Over-the-road bus means a bus characterized by an elevated passenger deck located over a baggage compartment....
Search Results "Bus Loading Zone"
Commonly Searched Documents
-
§ 37.3 Over-the-road bus
-
810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
12181(5) Over-the-road bus
(5) Over-the-road bus The term "over-the-road bus" means a bus characterized by an elevated passenger deck located over a baggage compartment....
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide...
-
Bus Rapid Transit
[See subsections ...]
-
11B-503.5 Vertical clearance
Vehicle pull-up spaces, access aisles serving them, and a vehicular route from an entrance to the passenger drop-off and loading zone and from the passenger drop-off and loading zone to...
- Lift-U® Fold-Out Ramp Plus
-
Subpart B—Buses, Vans and Systems
[See subsections ...]
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
11B-1008.2.6.2 Use zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
-
11B-206.2.1 Site arrival points
At least one accessible route shall be provided within the site from accessible parking spaces and accessible drop-off and passenger loading zones; public streets and sidewalks; and public...
-
11B-206 Accessible routes
The area of weather protection shall include the passenger loading zone complying with Section 11B-209.3 and the accessible route from the passenger loading zone to the accessible entrance...
-
810.2.2 Dimensions
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
Occupant Load
The number of persons for which the means of egress of a building or portion of a building is designed.
-
OCCUPANT LOAD
The number of persons for which the means of egress of a building or portion thereof is designed.
-
OCCUPANT LOAD
The number of persons for which the means of egress of a building or portion thereof is designed.
-
209.2.3 On-Street Bus Stops
209.2.3 On-Street Bus Stops. On-street bus stops shall comply with 810.2 to the maximum extent practicable....
-
Feature 1 - Temporary Barrier Removal, Parking and Passenger Drop-Off Areas
Feature 1 - Temporary Barrier Removal, Parking and Passenger Drop-Off Areas
-
A3
A3. Is the area for the access aisle at least 5-feet wide and 20-feet long? [ADA Standards § 4.6.6]. Yes No Note: Unlike at an accessible parking space, the surface...
-
A4.6.5 Vertical Clearance
High-top vans, which disabled people or transportation services often use, require higher clearances in parking garages than automobiles.
-
B1. Slope
B1. Is a relatively level (1:50 or 2% maximum slope in all directions) access aisle provided adjacent and parallel to the side of the vehicle pull-up area? [ADA Stds 4.6.6] Yes...
-
810.2.3 Connection
Bus stop boarding and alighting areas shall be connected to streets, sidewalks, or pedestrian paths by an accessible route complying with 402....