Accessibility requirements for level boarding bus systems are new to the 2016 Non-Rail Vehicle Guidelines because the advent of such transit systems (e.g., bus rapid transit systems) post-dated...
Search Results "Bus Loading Zone"
Filters
Commonly Searched Documents
-
T202 Accessible Means of Boarding and Alighting
-
T404.3 Ramps and Bridgeplates
space between the floor of non-rail vehicles and a boarding platform is greater than 2 inches (51 mm) horizontally or 5/8 inch (16 mm) vertically when measured at 50 percent passenger load...
-
1002.3 Load and Unload Areas
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
1002.3 Load and Unload Areas
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
§ 38.159(d)(1) Design load
(1) Design load....
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3....
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3. ...
-
11B-234.4.1 Load and unload areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with Section 11B-1002.3....
-
Use Zone
The ground level area beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see "Referenced Standards"...
-
Maneuvering Space in Load and Unload Areas
Maneuvering Space in Load and Unload Areas....
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
§ 38.159(c)(1) Design load
(1) Design load....
-
12145(a) Granting
(a) Granting With respect to the purchase of new buses, a public entity may apply for, and the Secretary may temporarily relieve such public entity from the obligation under...
-
§ 38.159(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds (2665 N)....
-
T502.2 Doorways with Lifts, Ramps or Bridgeplates
The vertical clearance at doorways with lifts, ramps or bridgeplates shall comply with T502.2. Vertical clearance shall be measured from the inside finished edge of the door opening...
-
§ 37.169 Interim requirements for over-the-road bus service operated by private entities
[80 FR 13261, Mar. 13, 2015, as amended at 80 FR 26196, May 7, 2015]
-
Requirements to Remember for: Bus Rapid Transit Systems
[See subsections ...]
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
11B-1002.3 Load and unload areas
A turning space complying with Sections 11B-304.2 and 11B-304.3 shall be provided in load and unload areas....
-
T502.2.2 Other Vehicles
For other non-rail vehicles, the vertical clearance at doorways shall be 56 inches (1420 mm) minimum on small non-rail vehicles and 68 inches (1725 mm) on large non-rail vehicles.
-
Accessible Path of Travel
The accessible path of travel must extend from the altered primary function area to site arrival points, including public sidewalks and parking and passenger loading zones provided on the...
-
11B-1008.2.5.3 Handrails
Exceptions: Handrails shall not be required on ramps located within ground level use zones. Handrail extensions shall not be required....
-
12145(a)(1)
(1) that the initial solicitation for new buses made by the public entity specified that all new buses were to be lift-equipped and were to be otherwise accessible to and usable by...