Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
Search Results "Bus Loading Zone"
-
11B-1002.5 Amusement ride seats designed for transfer
-
§ 38.23(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds....
-
206.2.9.1 Load and Unload Areas
206.2.9.1 Load and Unload Areas. Load and unload areas shall be on an accessible route....
-
F206.2.8.1 Load and Unload Areas
Load and unload areas shall be on an accessible route....
-
206.2.9.1 Load and Unload Areas
Load and unload areas shall be on an accessible route....
-
1018.3 Aisles in Groups B and M
In Group B and M occupancies, the minimum clear aisle width shall be determined by Section 1005.1 for the occupant load served, but shall be not less than that required for corridors by...
-
Section 810.2.2
For example, a bus driver could position the bus at a nearby point—even if not the precise location of the designated stop—so that a passenger needing a lift or ramp to get on or off the...
-
234.4.1 Load and Unload Areas
234.4.1 Load and Unload Areas. Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
11B-206.4.10 Medical care and long-term care facilities
The area of weather protection shall include the passenger drop-off and loading zone complying with Section 11B-209.3 and the accessible route from the passenger loading zone to the accessible...
-
11B-206.4.10 Medical care and long-term care facilities
The area of weather protection shall include the passenger loading zone complying with Section 11B-209.3 and the accessible route from the passenger loading zone to the accessible entrance...
-
1018.5 Aisles in other than assembly spaces and Groups B and M
In other than rooms or spaces used for assembly purposes and Group B and M occupancies, the minimum clear aisle capacity shall be determined by Section 1005.1 for the occupant load served...
-
1002.3 Load and Unload Areas
1002.3 Load and Unload Areas. A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
T202 Accessible Means of Boarding and Alighting
Accessibility requirements for level boarding bus systems are new to the 2016 Non-Rail Vehicle Guidelines because the advent of such transit systems (e.g., bus rapid transit systems) post-dated...
-
F234.4.1 Load and Unload Areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
234.4.1 Load and Unload Areas
Where load and unload areas serving existing amusement rides are newly designed and constructed, the load and unload areas shall comply with 1002.3....
-
T404.3 Ramps and Bridgeplates
space between the floor of non-rail vehicles and a boarding platform is greater than 2 inches (51 mm) horizontally or 5/8 inch (16 mm) vertically when measured at 50 percent passenger load...
-
§ 38.159(d)(1) Design load
(1) Design load....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
11B-206.2.9.1 Load and unload areas
Load and unload areas shall be on an accessible route....
-
12145(a) Granting
(a) Granting With respect to the purchase of new buses, a public entity may apply for, and the Secretary may temporarily relieve such public entity from the obligation under...
-
1002.3 Load and Unload Areas
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
1002.3 Load and Unload Areas
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas....
-
§ 38.159(c)(1) Design load
(1) Design load....