Where accessible routes intersect playing surfaces of holes, a 1 inch (25 mm) maximum curb shall be permitted for a width of 32 inches (815 mm) minimum. 3....
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
Filters
Commonly Searched Documents
-
1007.2 Accessible Routes
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (12.7 mm) maximum....
-
11B-809.10.5.2 Reinforcement for grab bars
At the control end wall and head end wall, between 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish floor, extending 28 inches (711 mm) minimum from the front edge...
-
Knee & Toe Space [M303.2.4]
The subcommittee reviewed the existing data of wheelchair users1 and industry input on how these elements technically affect one another....
-
PlayLSI: A Higher Level of Inclusive Play
At Landscape Structures, we're creating play environments where all children and their families can play together, regardless of their abilities....
-
Homeless Shelters, Group Homes, and Similar Social Service Establishments
Section 233 of the 2010 Standards includes specific scoping and technical provisions that apply to new construction and alteration of residential facilities....
-
C.1. - Who within the agency is responsible for ensuring EIT purchases comply with Section 508?
Acquisition of EIT that meets the applicable technical provisions of the Access Board’s standards is the shared responsibility of requiring activity officials and contracting officials....
-
ADA INFORMATION RESOURCES
Department of Education to provide ADA technical assistance to businesses, States and localities, and people with disabilities....
-
Documenting Exceptions and Notifying the U.S. Access Board About Exemptions
Access Board About Exemptions When a condition for an exception prohibits full compliance with a specific technical requirement on a section of trail as allowed in General Exception 1, document...
-
407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum....
-
1011.8 Viewing Scopes
This section requires eyepieces on viewing scopes to be 43 inches minimum and 51 inches maximum above the ground....
-
Standard Roll-In Type Shower Compartments: ADA Standard Section 608.5.2
Section 608.5.2 covers the current ADA Standards for controls in standard roll-in type shower compartments.
-
Grab Bars: ADA Standard Section 1009.4.5
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
11B-812.7.2 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 11B-303.3 Beveled....
-
907.4.2.2 Height
The maximum effort to activate controls shall be no greater than 5 pounds-force. ◼...
-
Communication Features in Guest Rooms
As discussed above in section 702, technical requirements for visual alarms in the proposed rule have been replaced with references to criteria in the NFPA 72....
-
Usable
In addition, companies must provide functionally equivalent access to support services, such as technical support hotlines and databases, call centers, service centers, repair services and...
-
E. Application Processes for Competitive or Discretionary Grants
State agencies that provide technical assistance for the completion of the application process must provide such assistance without discrimination against any one recipient or class of recipients...
