Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
Search Results "Latch Side Clearance"
-
404.2.7 Door and Gate Hardware
-
4.34.6 KITCHENS
Accessible or adaptable kitchens and their components shall be on an accessible route and shall comply with the requirements of 4.34.6.
-
11B-806.2.3.1 Personal lift device floor space
The clear space shall extend under the bed parallel to the long side and be adjacent to an accessible route....
-
DSA Drawing 11B-406-3 Perpendicular Curb Ramp next to a Curb and Gutter (2016 CBC)
Requires the Premium User plan or above. (Login or upgrade your account!) -
1022.9 Stairway identification signs
They must be tactile, and located at the latch side of the door as prescribed by 2013 CBC Section 11B-703.4....
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
Result: The door cannot be opened if the user cannot operate the latch or handle. Requirement: 4.13.9* Door Hardware....
-
Doors at Entrances to Businesses
It may also be possible to use special "swing clear" hinges that provide approximately 1 1/2 inches more clearance without replacing the door and door frame....
-
The Corada Shop
-
1010.2.2 Hardware
Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the...
-
1010.2.2 Hardware
Door handles, pulls, latches, locks and other operating devices on doors required to be accessible by Chapter 11A or 11B shall not require tight grasping, tight pinching or twisting of the...
-
Attachment I: Program Access in Existing Facilities
Attachment I: Program Access in Existing Facilities
-
1117B.5.7
Where permanent identification signs are provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—out-swinging doors (Req. #28)
In order to assess monetized benefits for the requirement covering water closet clearances in single-user toilet rooms with out-swinging doors, a determination needed to be made concerning...
-
General description of monetized benefits for water closet clearance in single-user toilet rooms—out-swinging doors (Req. # 28)
In order to assess monetized benefits for the requirement covering water closet clearances in single-user toilet rooms with out-swinging doors, a determination needed to be made concerning...
-
804 Kitchens and Kitchenettes
Clearances for pass through kitchens address counters, appliances, or cabinets on two opposing sides....
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall....
-
Non-Tactile Signage
Finish & Contrast · light/dark contrast · non-glare finish · light/dark contrast · non-glare finish Location · 60" height to centerline on wall at latch...
-
1023.9 Stairway identification signs
They must be tactile and located at the latch side of the door as prescribed by CBC Section 11B-703.4....
-
608.2.1 Transfer Type Shower Compartments
Transfer type shower compartments shall be 36 inches (915 mm) by 36 inches (915 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (915...
-
Fur out the wall
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
PEMKO 5 5/16" Latching Panic Saddle Threshold No. 273x224-FGT
Requires the Premium User plan or above. (Login or upgrade your account!) -
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall....
