The Door Closer has separate valves to control closing and latching speeds. 90 Degree Hold Open and No Hold Open models are available....
Search Results "Latch Side Clearance"
Filters
Commonly Searched Documents
-
CRL Jackson 900 Series Floor Mounted Door Closers
-
4.13.11(2)(c)
(c) sliding or folding doors: 5 lbf (22.2N) These forces do not apply to the force required to retract latch bolts or disengage other devices that may hold the door in a closed position...
-
Figure 608.2.3 Alternate Roll-In Type Shower Compartment Size and Clearance – Drawing from the U.S. Access Board
-
Figure 608.2.2 Standard Roll-In Type Shower Compartment Size and Clearance – Drawing from the U.S. Access Board
-
At your service. A 20 minute film. Engage customers with disabilities.
The Mid-Atlantic ADA Center has partnered with Storyline Motion Pictures (filmmakers of the critically acclaimed PBS documentary Lives Worth Living, and curators of the Disability...
-
Door and Gate Opening Force: ADA Standard Section 404.2.9
Section 404.2.9 covers the current ADA Standards for door and gate opening force.
-
11B-502.3.4 Location
Access aisles shall be permitted to be placed on either side of the parking space except for van parking spaces which shall have access aisles located on the passenger side of the parking...
-
Allegion LCN 1460 Series Surface Mounted Door Control
Closers with regular or hold-open arm mount hinge side or top jamb....
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
2. b. ii. Accessible Door Hardware
accessible door passage shall be mounted no higher than 48 in (1220 mm) above finished floor. xv Figure 14 and 15 (top and bottom left) Non-accessible door handles A thumb latch...
-
11B-604.2 Location
The water closet shall be positioned with a wall or partition to the rear and to one side....
-
A & M Hardware, Inc. Mounting Bracket
Features Made in the USA 12 Gauge Steel offers superior strength Available in Black, White and Primer Optional mounting holes on sides of Black Brackets to install your finishing...
-
Pilot Rock: Picnic Table ADA Compliance Comparison
The ADA Guidelines define a "clearance box" that must fit under the table to be accessible....
-
Pilot Rock WPTS Square Frame Picnic Table Using Formed Steel Channel
Full length seats offer full capacity seating which is an advantage over extended top or side access tables....
-
Pilot Rock WPTS Square Frame Table Using Aluminum
Full length seats offer full capacity seating which is an advantage over extended top or side access tables....
-
Overlap: ADA Standard Section 603.2.2
Section 603.2.2 covers the current ADA Standards for overlapping clear floor space at fixtures and turning spaces in toilet and bathing rooms.
-
11B-813.2.9 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
11B-603.2.2 Overlap
Required clear floor spaces, clearance at fixtures, and turning space shall be permitted to overlap....
-
Turning Space: ADA Standard Section 809.2.2
It is generally acceptable to use required clearances to provide wheelchair turning space....
-
Outdoor Constructed Features
or part of three sides in 305.7 of the Architectural Barriers Act Accessibility Guidelines....
-
What is best way to provide accessible curb-side EVCS (like parallel parking)?
RESPONSE: Though the building code does not regulate EVCS in the public right-of-way, accessibility is still required under the federal Americans with Disabilities Act. Since there...
-
Grab Bars: ADA Standard Section 604.8.2.3
Section 604.8.2.3 covers the current ADA Standards for grab bars in ambulatory accessible compartments.
