For example: The evaluation may indicate that a person can lift up to 30 pounds and can reach only 2 feet above the shoulder; the job as usually performed (without accommodation) requires...
Search Results "Shoulder-to-Shoulder Seating"
-
1. Whether this person currently is able to perform this specific job, with or without an accommodation
-
Midmark Ritter 223 Barrier-Free® Power Examination Table
Help them help themselves with features such as: Power height 400-pound patient weight capacity 18-inch to 37-inch seat height adjustment Foot control standard Length with...
-
Midmark Ritter 222 Barrier-Free® Power Examination Table
Help them help themselves with features such as: Power height Manual back with air spring assist 400-pound patient weight capacity 18-inch to 37-inch seat height adjustment...
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine, prone, or side-lying position, and diagnostic equipment used by patients in a seated...
-
Tips for Communicating with Individuals with Mobility Impairments
Never patronize people who use wheelchairs by patting them on the head or shoulder. Do not assume the individual wants to be pushed —ask first....
-
221.2.1.1 General Seating
221.2.1.1 General Seating. Wheelchair spaces complying with 802.1 shall be provided in accordance with Table 221.2.1.1....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
AMUSEMENT RIDE SEAT
[DSA-AC] A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
Requirement 6. Reinforced walls for grab bars.
that all premises within covered multifamily dwelling units contain reinforcements in bathroom walls to allow later installation of grab bars around toilet, tub, shower stall and shower seat...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
appropriate for the location and size of transfer supports on diagnostic equipment used by patients in a supine, prone or side-lying position, and diagnostic equipment used by patients in a seated...
-
4. Wheelchair seat depth
Wheelchair seat depth For this study, wheelchair seat depth was calculated as the horizontal distance from the proximal (i.e., towards the rear) edge to the distal (i.e., towards the...
-
7. Seat Transfer
Are the roll-in showers free of doors that would impede wheelchair transfer onto the seat? [ADA Stds. 4.21.8] Yes __ No __ N/A __ Comments: _______________________________________...
-
Plan 1B: 13-Foot Wide Accessible Guest Room
Features include a standard bathtub with a seat, comparable vanity, clothes closet with swinging doors, and door connecting to adjacent guest room....
-
Midmark 625 Barrier-Free® Power Examination Table
Features include: Power height and back 650-pound patient weight capacity 18-inch to 37-inch seat height adjustment Unique Quick Exam® and Motion Profiling™ control features...
-
Associated
Dispensers associated with the use of a water closet and allowed to overlap the water closet clearance include seat cover, feminine hygiene product, disposal bag, and toilet paper dispensers...
-
M305.2.8 Fittings (Section-by-Section Analysis)
A different manufacturer stated that its seated diagnostic equipment uses armrests as transfer supports, which can be pushed back toward the rear of the equipment to allow entry....
-
Midmark 623 Barrier-Free® Power Examination Table
Features include: Power height and back 400-pound patient weight capacity 18-inch to 37-inch seat height adjustment Hand and foot control (standard) Receptacle and rear storage...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Benches
Benches in amphitheaters must comply with the requirements in ABAAS section F221 for assembly areas, including wheelchair spaces, companion seats, designated aisle seats, and lawn seating...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Seat support surface plane (defined by four corner points and one point at the interface of the occupant & seat surface i.e. compressed seat surface) Informs the 3-D digital model...
-
Figure M3: Overview of M302 Diagnostic Equipment for Use by a Patient in a Seated Position
[See subsections ...]
-
Question 21
YES/NO 21. Are all the accessible dispensers in the public restrooms filled?
