Hello. Please sign in!

Uniform Federal Accessibility Standards (UFAS)

Note: This document, portion of document or referenced document was published prior to the 2010 ADA Standards, and all or part of this information may only apply to Safe Harbored elements.

4.34.5.4 BATHTUBS.

If a bathtub is provided, then it shall have the following features:

4.34.5.4(1) Floor space.

(1) Floor space. Clear floor space at bathtubs shall be as shown in Fig. 33.

4.34.5.4(2) Seat.

(2) Seat. An in-tub seat or a seat at the head end of the tub shall be provided as shown in Fig. 33 and 34. The structural strength of seats and their attachments shall comply with 4.26.3. Seats shall be mounted securely and shall not slip during use.

4.34.5.4(3) Grab bars.

(3) Grab bars. Structural reinforcement or other provisions that will allow installation of grab bars shall be provided in the locations shown in Fig. 48. If provided, grab bars shall be installed as shown in Fig. 34 and shall comply with 4.26.

4.34.5.4(4) Controls.

(4) Controls. Faucets and other controls shall be located as shown in Fig. 34 and shall comply with 4.27.4.

4.34.5.4(5) Shower unit.

(5) Shower unit. A shower spray unit with a hose at least 60 in (1525 mm) long that can be used as a fixed shower head or as a hand-held shower shall be provided.

Figure 48

Location of Grab Bars and Controls of Adaptable Bathtubs

Location of Grab Bars and Controls of Adaptable Tubs, With Seat in Tub

Figure 48(a)

With Seat in Tub

Note: The hatched areas are reinforced to receive grab bars.

Location of Grab Bars and Controls of Adaptable Tubs, With Seat at Head of Tub

Figure 48(b)

With Seat at Head of Tub

Note: The hatched areas are reinforced to receive grab bars.

[MORE INFO...]

*You must sign in to view [MORE INFO...]