Forces for pushing or pulling doors open are measured with a push-pull scale under the following conditions:...
Search Results "Mitigating Measures"
-
A4.13.11 Door Opening Force
-
A4.13.11 DOOR OPENING FORCE
Forces for pushing or pulling doors open are measured with a push-pull scale under the following conditions:...
-
R304.2.3 Flared Sides
Where a pedestrian circulation path crosses the curb ramp, flared sides shall be sloped 10 percent maximum, measured parallel to the curb line. Advisory R304.2.3 Flared Sides....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....
-
§ 38.159(b)(8) Platform entrance ramp
The entrance ramp, or loading-edge barrier used as a ramp, shall not exceed a slope of 1:8, measured on level ground, for a maximum rise of 3 inches (75 mm), and the transition from roadway...
-
11B-604.9.6 Dispensers
Toilet paper dispensers shall comply with Section 11B-309.4 and shall be 7 inches (178 mm) minimum and 9 inches (229 mm) maximum in front of the water closet measured to the centerline of...
-
COMMENTS
The Department believes that legitimate safety requirements, including crime prevention measures, may be taken into account so long as they are based on actual risks and are necessary for...
-
Diversified Woodcrafts Oak Table with Book Compartments 24x48
The book compartments measure 14" W x 13-5/8"D x 3-7/8"H. The table has a weight capacity of 500 lbs. On tables 72"W or over, we recommend ordering with leg braces and stretchers....
-
Section 1630.2(j)(4) Condition, Manner, or Duration
The regulations provide that in assessing substantial limitation and considering facts such as condition, manner, or duration, the non-ameliorative effects of mitigating measures may be...
-
Regulatory Flexibility Act
B: Regulatory Assessment sections entitled, "Background," "Regulatory Alternatives," "Regulatory Proposals with Cost Implications," and "Measurement of Incremental Benefits"; see also 69...
-
Regulatory Flexibility Act
B: Regulatory Assessment sections entitled, "Background," "Regulatory Alternatives," "Regulatory Proposals with Cost Implications," and "Measurement of Incremental Benefits"; see also 69...
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
Rationale for recommendation Each of these measurements creates a more accessible piece of imaging equipment while balancing the physical attributes and operation of the equipment....
-
Introduction
., 527 U.S. 471 (1999), the Court ruled that whether an impairment substantially limits a major life activity is to be determined with reference to the ameliorative effects of mitigating...
-
Installation of Test Surfaces
Measure the needed material by volume (1.5x the volume needed). b) Measure EWF moisture content. c) Measure the binder as a proportion of EWF dry weight....
-
Digital Human Models
Although the true center of rotation remains unknown for most joints, especially for the more complex joints such as the hip and shoulder, anthropologists measure the length of various links...
-
Documentation of Impact and Validity Evidence
(5) Criterion measures. ...
-
§1607.15 Documentation of impact and validity evidence.
(5) Criterion measures. ...
- Seton Florida State Parking Signs - ISA Symbol
- Access-Able Designs Bariatric Shower Bench SH-430-3SDL
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
Urinal Depth
In the proposed rule, the Board sought to clarify the requirement in the original ADAAG that accessible urinals have an "elongated" rim by specifying a minimum dimension of 13 ½ inches, measured...
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [ECTCR UFAS 4.6.4] Advisory 502.6 Identification....