As a result of this flexibility, the Department believes that the program accessibility requirement as it is codified in the current regulation may appropriately mitigate any burdens on...
Search Results "Mitigating Measures"
-
Safe harbor.
-
Executive Order 13132: Federalism
The 2010 Standards address federalism concerns and mitigate federalism implications, particularly the provisions that streamline the administrative process for State and local governments...
-
III-3.8000 Direct threat
duration, and severity of the risk; 2) The probability that the potential injury will actually occur; and 3) Whether reasonable modifications of policies, practices, or procedures will mitigate...
-
Step 2: Identify the Presence of Limiting Factors
Construction Tip Choose a method to measure the running slope. There are a number of ways you can measure running slope....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
903.4 Back Support
Back support shall be 2 1/2 inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
H.2. - Does Section 508 apply to a Federal agency's existing EIT procured prior to June 21, 2001?
Although the amendments to Section 508 were effective on August 7, 1998, there were no standards to measure compliance until the standards published by the Access Board became effective...
-
Surcharges
against discrimination: (f) A public entity may not place a surcharge on a particular individual with a disability or any group of individuals with disabilities to cover the costs of measures...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
604.3.2 Overlap
complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance at the water closet is 66 inches (1675 mm) minimum measured...
-
FAQ: How do I upgrade my subscription?
Upgrading to a Premium or Accessibility Specialist level subscription will provide access to more Corada content such as selected state accessibility requirements, "how to measure" videos...
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
- Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
- Just Manufacturing Concealed Classroom Faucet with High Rise Spout
- Halsey Taylor Cane Touch Apron for HAC ADA Series
- HEWI System Lignum Protect Handrails
- Seton Add-on Van Accessible Parking Sign
-
3.3.1 Research Data
anthropometric study of 500 persons who use wheeled mobility devices (WMD) involved collection of demographic data, information on WMD characteristics, and structural and functional anthropometry measures...
-
T302 Walking Surfaces
With respect to slip resistance, a bus manufacturer urged the Access Board to incorporate specific measures for slip resistance (i.e., maximum and minimum friction coefficients) in the final...