The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
Search Results "Counter Length"
Filters
Commonly Searched Documents
-
11B-502.6.4.2
-
§ 38.159(b)(6) Platform surface
mm) at the platform, a minimum clear width of 30 inches (760 mm) measured from 2 inches (50 mm) above the platform surface to 30 inches (760 mm) above the platform, and a minimum clear length...
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
Boat Slips: ADA Standard Section 235.2
Section 235.2 covers scoping requirements in the current ADA Standards for boat slips.
-
11B-403.5.1 Clear width
Exceptions: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated...
-
EZ-ACCESS Transitions® Angled Entry Plate
The Angled Entry Plate is available in 8-, 10-, & 12-inch lengths....
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
Switching Between Voice and TTY Modes
VCO and HCO shorten the lengths of calls that would otherwise be conducted exclusively by typing....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
The access aisle must be 1.5 meters (5 feet) wide minimum, extend the entire length of the vehicle pull-up space, and connect to the pedestrian access route....
-
7.1 Q. Do the new construction requirements of the Fair Housing Act apply to continuing care facilities which incorporate housing, health care and other types of services?
Factors that the Department will consider in making such an examination include, but are not limited to: 1. the length of time persons stay in the project; 2. whether policies are...
-
208.1.1
The facility may not reduce the required number or dimensions of those spaces or unreasonably increase the length of the accessible route from a parking space to the facility....
-
8. Report
Method E1364. 8.1.2 Longitudinal Profile Measurements—Data from the profile measuring process shall include the date and time of day of the measurement, the location of the measurement, length...
-
1.2.5 Ramps
.), length of travel, and other variables. It seems reasonable to allow a +0.5% tolerance for ramp slopes and cross slopes....
-
11B-1003.2.2 Boarding piers at boat launch ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
11B-805.7 Built-in cabinets and work surfaces
Built-in cabinets, counters and work surfaces shall be accessible, including: patient wardrobes, nurse’s stations, administrative centers, reception desks, medicine preparation areas, laboratory...
-
4.4 Knee and Toe Clearances
The results clearly provide evidence that adjustable and adaptable counters and toe kicks are a valuable design strategy....
-
Recommendations for Contracts
If needed, you can counter with an alternate agreement and/or contract amendments. For large and/or complex events you should seek legal advice....
-
III-7.7000 Alterations
of rescue assistance are not required in alterations (§4.1.6(1)(g)). 3) There are special less stringent requirements for alterations in many other areas, including sales and service counters...
-
At your service. A 20 minute film. Engage customers with disabilities.
We invite you to view our 20-minute film in its full length or as the brief Preview. For additional tips, and resources, and information visit www.adainfo.org...
-
Passenger Loading Zones
Accessible passenger loading zones must have an access aisle that is 60 inches wide minimum and extends the full length of the vehicle pull-up space....
-
5.4.1 Transfer Support Location for M301 and M302
Figure 5.4.1 Location and Length of Transfer Supports (SOURCE: Midmark Corporation) A: Table seat depth, 17 inches minimum B: Transfer support length, 15 inches minimum C: Distance...
-
1003.3.1 Boat Slip Clearance
Clear pier space shall be permitted to be 36 inches (915 mm) wide minimum for a length of 24 inches (610 mm) maximum, provided that multiple 36 inch (915 mm) wide segments are separated...
-
Short Hikes and Interesting Features
Add together all the lengths of trail where technical requirements can't be met because of conditions for an exception....
