Counter surfaces shall not be considered shelf space nor used to satisfy the requirements of 804.5....
Search Results "Counter Length"
Filters
Commonly Searched Documents
-
Technical Memorandum TM 2013-22 Storage (Kitchens and Kitchenettes)
-
Play Tables
Play Tables Play tables are surfaces, boards, slabs, or counters that are created for play....
-
A. Changes in Level
.: back of registration counter, housekeeping storage rooms, kitchens, administrative offices, etc.) Yes __ No __ N/A __ Comments: ___________________________________________...
-
11B-306.3.3 Minimum required depth
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
11B-306.3.3 Minimum required depth
high minimum above the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter...
-
5.9.1 Standing Supports Recommendation In Reference To Mammography Equipment
Rationale for recommendation The original criteria proposed in the NPRM included vertical standing supports on both sides of the equipment that were 18 inches in length....
-
M301.2.3 Transfer Sides
• Sub-Committee Recommendation: The transfer surface shall be located to provide options to transfer from a mobility device onto both long sides (length), right and left, of the surface...
-
Standing Supports [M305.2]
Rationale The original criteria proposed in the NPRM included vertical standing supports on both sides of the equipment that were 18 inches in length....
-
1. Sloped Surfaces
The amount of slope or grade is described as the proportion of a vertical rise to a horizontal length....
-
Selection of Methodology
complete survey questions within eight research sections: SECTION #1 Geographic, demographic, and political information (type of management agency, park location, trail name, age of trail, length...
-
11B-406.5.3 Landings
The landing clear length shall be 48 inches (1219 mm) minimum....
-
406.7 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
5.9 Standing Support Recommendations for M304 Diagnostic Equipment Used by Patients in a Standing Position
These standing supports may be provided in a horizontal position, vertical position, or a combination of horizontal and vertical positions, as long as the minimum length of gripping surface...
-
1003.2.2 Boarding Piers at Boat Launch Ramps
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
407.12.3.2 Obstructed Forward Reach (Section-by-Section Analysis)
An obstructed forward reach, for purposes of this section, occurs when the operable part is located behind the leading edge of the maximum protrusion within the length of the vertical reference...
-
7.4.11.2 Sign Contents
are provided at trailheads on newly constructed or altered trails, regardless of whether the trail is accessible, the signs shall include at minimum the following information: Length...
-
3.3 Need for "Overriding" Principle
The concept and the research project through which we arrived at our performance recommendations will be expanded upon at length in the last section of this paper....
-
Horizontal Alignment
However, using the observed 85th percentile stopping sight distance for bicyclists, 12.4 m (41 ft), yields a required length offset of only 1.3 m (4.1 ft)....
-
4.5.3* CARPET
Exposed edges of carpet shall be fastened to floor surfaces and have trim along the entire length of the exposed edge. Carpet edge trim shall comply with 4.5.2....
-
1.1.7 Measurement of parking areas
These areas should be considered as a pedestrian walk with a minimum width of 60 in. and a length of approximately 20 ft and with an ADA/ABA - AG maximum slope of 1:48 in both directions...
-
Carpet [§302.2]
Exposed edges must have trim on the entire length of the exposed edge and be fastened to the floor to prevent curling....
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
§ 38.159(b)(6) Platform surface
mm) at the platform, a minimum clear width of 30 inches (760 mm) measured from 2 inches (50 mm) above the platform surface to 30 inches (760 mm) above the platform, and a minimum clear length...