keeping their legs properly positioned.AA For those chairs that transform into examination tables, reducing the distance between the floor and seat height may also restrict the overall length...
Search Results "Counter Length"
Filters
Commonly Searched Documents
-
4.1.3 Adjustable Height Chairs with and without Footplates
-
Gangway Slope and Rise Exceptions
Gangway Slope and Rise Exceptions Gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 30 feet in length....
-
4. Wheelchair seat depth
Individual wheelchair seat depths are generally about 2 in. less than buttock-popliteal length in most case – this is a rough guideline and is quite similar to deciding seat depths for ambulatory...
-
11B-405.7.5 Doorways
Where a door swings onto a ramp landing width, additional ramp landing length as specified may be necessary to accommodate a clear level area for the wheelchair user to clear the door swing...
-
11B-809.10.7.3 Reinforcement for grab bars
The backing shall 40 (sic) inches (1016 mm) minimum in length....
-
1005.1 Accessible Routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
1005.1 Accessible Routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Interruptions along the bottom of the transfer support gripping surface will not obstruct more than 20% of its length per ADA and ABA 2004 Guidelines Section 505.6....
-
§ 36.303(c)(1)(ii)
(ii) The type of auxiliary aid or service necessary to ensure effective communication will vary in accordance with the method of communication used by the individual, the nature, length,...
-
403.5.1 Clear Width
EXCEPTION: The clear width shall be permitted to be reduced to 32 inches (815 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by...
-
1005.1 Accessible Routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
4.8.4 LANDINGS
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
2.4.1 Running Slope (Grade)
Running Slope (Grade) and Resting Intervals Running Slope (Grade) of Segment of Outdoor Recreation Access Route Maximum Length of Segment Between Resting Intervals ...
-
§ 35.160(b)(2)
(2) The type of auxiliary aid or service necessary to ensure effective communication will vary in accordance with the method of communication used by the individual; the nature, length,...
-
§ 38.29(e)
(e) For vehicles in excess of 22 feet in length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either terminate at the lower edge of the aisle-facing...
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
ANSWERS TO DISABILITY SAVVY QUIZ
If service counters are too high for people of short stature and people using wheelchairs, step around the counter to provide service....
-
BS8300:2001 Research
Reach ranges were measured using a fixed counter height at 750 mm and at three angles of arm reach with respect to the counter....
-
4. Applicability
We also proposed to require that carriers disclose (and make available to sell) Web-based discounts and waive telephone or ticket counter reservation fees for customers indicating that due...
-
FEATURES
Figure 10: Features of the countered shape of a medical examination table...
-
General: ADA Standard Section 222.1
Section 222.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dressing, fitting, and locker rooms.
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
11B-406.6 Islands
Each 48 inch (1220 mm) minimum by 36 inch (915 mm) minimum area shall be oriented so that the 48 inch (1220 mm) minimum length is in the direction of the running slope of the curb ramp it...