Handholds or stanchions shall be provided within large non-rail vehicles on all forward- and rear-facing seat backs located directly adjacent to the aisle....
Search Results "Non-Glare Finish"
Filters
Commonly Searched Documents
-
T207.4.2. Large vehicles
-
2. Emphasize abilities, not limitations.
wheelchair Wheelchair-bound; confined to a wheelchair Person who uses a communication device; uses an alternative method of communication Is non-verbal...
-
§8.4(b)(2)
of this part, housing, aids, benefits, and services, to be equally effective, are not required to produce the identical result or level of achievement for individuals with handicaps and non-handicapped...
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
1010.1.7 Thresholds
Thresholds at doorways shall not exceed ¾ inch (19.1 mm) in height above the finished floor or landing for sliding doors serving dwelling units or ½ inch (12.7 mm) above the finished floor...
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 _|Finish and Contrast|_ through 11B-703.5.4 _|Character Proportions|_, and Sections 11B-703.5.7 _|Stroke Thickness|_...
-
1134A.8, Item 1
The top of the fixture rim shall be a maximum of 34 inches (864 mm) above the finished floor....
-
Spa
Slip resistant oil finish on wood floors in the spa and bathroom Spa pre-heated with solar panels Thermal mass in the greenhouses to store heat during the day and release...
-
1134A.8, Item 1
The top of the fixture rim shall be a maximum of 34 inches (864 mm) above the finished floor....
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
11B-810.4 Bus signs
Bus route identification signs shall comply with Sections 11B-703.5.1 _|Finish and Contrast|_ through 11B-703.5.4 _|Character Proportions|_, and Sections 11B-703.5.7 _|Stroke Thickness|_...
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
§382.121(a)(3)
prescription medications and any medical devices needed to administer them such as syringes or auto-injectors, vision-enhancing devices, and POCs, ventilators and respirators that use non-spillable...
-
§382.127(e)
(e) You must not disconnect the battery on wheelchairs or other mobility devices equipped with a non-spillable battery completely enclosed within a case or compartment integral to the design...
-
C. Contrast
(Note: reflective signs are permitted if they are in addition to non-reflective signs.)...
-
III. Proposed Action/Summary
Proposed Action/Summary The Department is seeking information to assist it in determining if it should propose specific accessibility requirements for non-fixed equipment and furniture...
-
N. PROGRAM MODIFICATIONS
Access to County Programs Housed in Non-County Owned Facilities: To ensure that the County’s programs, services, and activities that are the subject of this Consent Decree and that...
-
§1193.37 Information pass through.
Telecommunications equipment and customer premises equipment shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information...
-
Section-by-Section Analysis
An appendix provides examples of non-mandatory strategies for addressing these guidelines....
-
T402.7 Edge Guards
bridgeplates shall provide edge guards continuously along each side of the ramp or bridgeplate to within 3 inches (75 mm) of the end of the ramp or bridgeplate that is deployed furthest from the non-rail...
-
502.2 Documented Accessibility Features (Section-by-Section Analysis)
that are defined in the platform documentation as accessibility features would be required to conform to requirements in accompanying subsections related to user control (502.2.1) and non-disruption...