Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
Search Results "Non-Glare Finish"
-
306.3.4 Clearance Reduction
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
604.8.3 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor....
-
603.4 Coat Hooks and Shelves
Shelves shall be located 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum above the finish floor....
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
- Landscape Forms GO Outdoor Table
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADAS] 502.6 Identification. ...
-
11B-502.6 Identification
Signs shall be 60 inches (1524 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [2010 ADA Standards] 502.6 Identification....
-
WHO IS IMPACTED BY THE NEW REGULATIONS?
revised regulations apply to the following entities, which have until March 15, 2011, to comply: State and Local Governments (ADA Title II, 28 CFR, Part 35) This includes any non-federal...
-
Emergency Evacuation Planning Guide For People with Disabilities
_______________________________________ © June 2016 National Fire Protection Association All or portions of this work may be reproduced, displayed or distributed for personal or non-commercial...
-
Alternative text is needed for images, links, controls and form elements
For any non-text content, text must be added, so that alternative non-visual presentation of the information is possible....
-
11B-608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
11B-806.2.4.1 Vanity counter top space
If vanity counter top space is provided in non-accessible guest bathrooms, toilet or bathing rooms, comparable vanity counter top space, in terms of size and proximity to the lavatory, shall...
-
11B-608.4 Seats
A folding or non-folding seat shall be provided in transfer type shower compartments....
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
D. Stowing and Treatment of Personal Equipment
You should be familiar with the legal requirements for storage and treatment of personal equipment used by passengers with a disability, including ventilator/respirators, non-spillable batteries...
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
Protrusion Limits: ADA Standard Section 307.2
Section 307.2 covers the current ADA Standards for protrusion limits.
-
11B-307.2 Protrusion limits
Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
-
Shower Compartment Seats: ADA Standard Section 610.3
Section 610.3 covers the current ADA Standards for shower compartment seats.
-
Height: ADA Standard Section 704.4.1
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
D. Election Day Compliance Review
Any polling place location found by the EDSs to be non-compliant in an election shall be reviewed by EDSs in the subsequent election. ...