Reinforcement for grabs bars shall comply with the following: Continuous reinforcement shall be installed in the walls of showers 30 inches (762 mm) maximum to 38 inches (965 mm) minimum above the finish...
Search Results "Non-Glare Finish"
Filters
Commonly Searched Documents
-
11B-809.10.6.4 Reinforcement for grab bars
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
11B-206.2.8 Employee work areas
Additionally, the Equal Employment Opportunity Commission (EEOC) implements Title I of the ADA which requires non-discrimination in the workplace....
-
Section-by-Section Analysis
Not all editorial or non-substantive revisions are addressed in this discussion....
-
E202.7.1 Required Documentation
The responsible agency official shall document in writing: (a) the non-availability of conforming ICT, including a description of market research performed and which provisions cannot be...
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Such a move is the rider’s decision and the operator cannot force a rider to transfer to a vehicle seat, although the operator can suggest a transfer in a non-coercive way....
-
§8.4(c)(1)
(1) Non-handicapped persons may be excluded from the benefits of a program if the program is limited by Federal statute or executive order to individuals with handicaps....
-
§104.33(c)(3) Residential placement
If a public or private residential placement is necessary to provide a free appropriate public education to a handicapped person because of his or her handicap, the placement, including non-medical...
-
Can an operator require a person to transfer from a wheelchair to a vehicle seat?
Such a move is the rider’s decision and the operator cannot force a rider to transfer to a vehicle seat, although the operator can suggest a transfer in a non-coercive way....
-
Water Play Components: ADA Standard Section 1008.2.3
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs....
-
§ 1194.23(a)
(a) Telecommunications products or systems which provide a function allowing voice communication and which do not themselves provide a TTY functionality shall provide a standard non-acoustic...
-
T208.1 General
Non-rail vehicles shall provide passenger access routes that permit boarding and alighting, onboard circulation, and seating by passengers with disabilities....
-
§8.3 Replacement cost of the completed facility
Construction and equipment costs do not include the cost of land, demolition, site improvements, non-dwelling facilities and administrative costs for project development activities....
-
Technical Memorandum TM 2013-16 Residential Amenity Centers
Rule 68.30(5) does not apply to any elements, areas, or spaces used, leased, or rented to residents or non-members for activities open to the general public, including but not limited to...
-
T207 Circulation Paths
As a matter of clarification, the proposed rule specified that, where doorways are provided on one side of a non-rail vehicle, an accessible circulation path must connect each wheelchair...
-
General [4.5.1]
Many variables affect the performance of a given walking surface, including slope and cross slope, its material, jointing, texture, and finish, the presence of moisture or contaminants,...
-
Installation of Aggregate Surfaces at Bradford Woods
following protocol: Prior to installing the crushed rock (aggregate) surfacing material, the trail bed shall be shaped to reflect the same linear grade and cross slope as the desired finished...
-
GRADE (Adjacent Ground Elevation)
[DSA-AC & HCD 1-AC] The lowest point of elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property...
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
What is the minimum level of slip resistance required by the standards?
Standard methods to prevent or minimize slipperiness in the specification of floor materials, textures, applications, and finishes may be sufficient for compliance with the standards. ...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
11B-203.9 Employee workstations
Employee work areas, or portions of employee work areas, other than raised courtroom stations, that are less than 300 square feet (28 m2) and elevated 7 inches (180 mm) or more above the finish...
-
Employer-Provided Leave and the Americans with Disabilities Act
Americans with Disabilities Act1 (May 9, 2016) [1] This document also applies to Federal employees protected under section 501 of the Rehabilitation Act, which has the same non-discrimination...