Although the true center of rotation remains unknown for most joints, especially for the more complex joints such as the hip and shoulder, anthropologists measure the length of various links...
Search Results "Measuring Technique"
Filters
Commonly Searched Documents
-
Digital Human Models
-
Section 36.304 Removal of Barriers (Preamble, Section-by-Section Analysis)
Moreover, the inclusion of a measure on this list does not mean that it is readily achievable in all cases....
-
Seton Reserved Parking Sign (With Graphic) and Post
in aluminum, polyethylene and steel materials Non-reflective surface are best for day time use while reflective option allows the sign to be visible even at night Sign measures...
-
Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
Unit measures 35 1/4" W x 20" H (895 x 508mm). Depth (closed) 4" (100 mm). Extension (open) 19" (483mm)....
-
Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
Unit measures 35 1/4" W x 20" H (895 x 508mm). Depth (closed) 4" (100 mm). Extension (open) 19" (483mm)....
-
Landscape Forms Inc. Arcata Collection Benches
With robust structure and visual sweep, Arcata meets the measure of expansive outdoor spaces offering a unique combination of classic and contemporary forms....
-
III-4.6100 Examinations
, rather than reflecting the individual's impaired sensory, manual, or speaking skills (except where those skills are the factors that the examination purports to measure)....
-
382.23 May carriers require a passenger with a disability to provide a medical certificate?
Under paragraph 382.21(c), if the section 382.23(c)(2) medical certificate provides measures for preventing the transmission of a disease, the carrier must provide transportation to the...
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
The footrest height data measures the height from the floor to the top surface of the footrest at its proximal outside corner....
-
1136A.2 Switch and control heights
occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment shall be located no more than 48 inches (1219 mm) measured...
-
What is an accessibility evaluation survey and when is one needed?
This is measured when the door is open 90 degrees for swinging doors and fully opened for other door types....
-
1136A.2 Switch and control heights
occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment shall be located no more than 48 inches (1219 mm) measured...
-
1136A.2 Switch and control heights
occupant of the room or area to control lighting and receptacle outlets, appliances, alarms or cooling, heating and ventilating equipment shall be located no more than 48 inches (1219 mm) measured...
-
11B-306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
Urinal Depth
In the proposed rule, the Board sought to clarify the requirement in the original ADAAG that accessible urinals have an "elongated" rim by specifying a minimum dimension of 13 ½ inches, measured...
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [ECTCR UFAS 4.6.4] Advisory 502.6 Identification....
-
Cross Slope
Once placed in the water, measurements, absent live loads, are to be made from a static condition (i.e., absence of movement that results from wind, waves, etc.)....
-
R302.6 Cross Slope
The cross slope of the pedestrian access route is measured perpendicular to the direction of pedestrian travel....
-
18.1 Q. Is it necessary to provide usable doors when the door leads to an area of the dwelling that is not accessible, such as the door leading down to an unfinished basement...?
Such doors would have to provide at least 32 inches nominal clear width when the door is open 90 degrees, measured between the face of the door and the stop....
-
306.1 General
Clearances are measured in relation to the usable clear floor space, not necessarily to the vertical support for an element....
-
12101(b)(2)
U.S. 471 (1999) and its companion cases that whether an impairment substantially limits a major life activity is to be determined with reference to the ameliorative effects of mitigating measures...
-
Side Reach [4.2.6]
High and low reaches are based on a depth of reach no greater than 10 inches measured from the available clear floor space....
-
Surface Textures [4.3.6]
Since there are no uniform test procedure or measurable values for these characteristics (except for slip-resistance), acceptable and unacceptable materials are not easy to categorize....
-
Size and Clearances [4.21.2]
The 36 by 36 inch dimension, measured to the interior finish, keeps front and side grab bars within reach from the seat....
