Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Measuring Technique"
Commonly Searched Documents
-
308.3.1 Unobstructed
-
604.3.2 Overlap
complying with 606 shall be permitted on the rear wall 18 inches (455 mm) minimum from the water closet centerline where the clearance at the water closet is 66 inches (1675 mm) minimum measured...
-
FAQ: How do I upgrade my subscription?
Upgrading to a Premium or Accessibility Specialist level subscription will provide access to more Corada content such as selected state accessibility requirements, "how to measure" videos...
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
§ 37.42(f)
Where the horizontal gap is more than 3 inches and/or the vertical gap is more than 5/8 inch, measured when the vehicle is at rest, the horizontal and vertical gaps between the car floor...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
-
1132A.5.1 General
Maneuvering clearances at interior doors shall provide a minimum length on both sides of the door of at least 42 inches (1067 mm) measured at a right angle to the plane of the door in its...
-
[F] 907.4.2.2 Height
The height of the manual fire alarm boxes shall be not less than 42 inches (1067 mm) and not more than 48 inches (1219 mm) measured vertically, from the floor level to the highest point...
- International Association of Assistance Dog Partners (IAADP)
-
4.3.4 Knee and Toe Clearances
from wall • Toe clearance height: 356 mm (14 in.) minimum , measured from the floor • Knee clearance height: 711 mm (28 in.) minimum, measured from the floor • Knee clearance depth...
-
3.3.1 Research Data
anthropometric study of 500 persons who use wheeled mobility devices (WMD) involved collection of demographic data, information on WMD characteristics, and structural and functional anthropometry measures...
-
T302 Walking Surfaces
With respect to slip resistance, a bus manufacturer urged the Access Board to incorporate specific measures for slip resistance (i.e., maximum and minimum friction coefficients) in the final...
-
B. Survey and Review of Polling Place Locations
If the Department concludes that the County has proposed a remedial provision that does not fully address the violation, then the Department will recommend a temporary remedial measure consistent...
-
A. Accessible Voting Program
The County agrees that the following temporary measures are reasonable and will be implemented where necessary to make an otherwise inaccessible polling place temporarily accessible on Election...
-
Transfer Protocols
For each transfer for protocols A-C, a measurement of how high and how low a participant transferred was recorded....
-
2.2.3 Functional Reach
Determining an individual’s 3-D reach envelope required that the reach envelope be measured relative to certain environmental, wheelchair and personal features (e.g. 3-D envelopes measured...
- Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
- Just Manufacturing Concealed Classroom Faucet with High Rise Spout
- Halsey Taylor Cane Touch Apron for HAC ADA Series
- HEWI System Lignum Protect Handrails
- Seton Add-on Van Accessible Parking Sign