X-Ray tables are also typically rated for patients in excess of 400 lbs, but are wider than those used with equipment with bores and in many cases are able to move horizontally in two directions...
Search Results "Horizontal Dispersion"
-
M301.2.1 Transfer Surface Height
-
2.3.3 Comparison of Dimensions with Standards and other Anthropometric Studies
The list below identifies the items in the standards and the anthropometric variables which were used for comparison: • Unoccupied Device Width: Compared to the horizontal distance between...
-
4. Perspectives of Equipment Types
Conventional XR and Fluoroscopy - This equipment has rectangular, radio-translucent tables that may translate in both directions in the horizontal plane....
-
Section 4.1.3, Accessible Buildings: New Construction (Preamble, Section-by-Section Analysis)
It requires dispersal of wheelchair seating locations in facilities where there are more than 300 seats....
-
Section 4.1.3, Accessible Buildings: New Construction (Section-By-Section Analysis and Response to Comments)
It requires dispersal of wheelchair seating locations in facilities where there are more than 300 seats....
-
1118B.4
Changes in level between 1/4 inch (6.4 mm) and 1/2 inch (12.7 mm) shall be beveled with a slope no greater than one unit vertical in 2 units horizontal (50-percent slope) [see Figure 11B...
-
M305.2.3 Height (Section-by-Section Analysis)
The transfer support is permitted to be horizontal, angled, curved, or a combination of these as long as the top of any point along the gripping surface is located at or between 6 inches...
-
5.4.1.2 Transfer and Positioning Support Location Recommendations for Imaging Equipment with Transfer Surfaces
For example, some x-ray tables require bi-directional horizontal movement to perform the functions for the images. A new generation of equipment is necessary to address this....
-
3.3.2 Experienced Clinicians
These deliberations will include discussions about the position (horizontal, angled, or vertical), length, gripping shape, and distance above and from the transfer surface....
-
7.2 Technological and Scientific Considerations
For instance, some x-ray tables require bi-directional horizontal movement to generate the specific image required for diagnostic purposes....
-
Guest Bathrooms
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds is applied at any point on the grab bar, fastener, mounting device, or supporting...
-
Benches
All parts of the bench must be able to withstand 250 pounds (1,112 newtons) applied vertically or horizontally at any point of the seat, fastener, mounting device, or supporting structure...
-
Station 5-Lateral Operating Space (Sweep Width)
Accordingly, researchers focused the survey design, hence data collection, of space dimensions to actual occupied horizontal and vertical dimensions of users operating within uncrowded pathway...
-
1124B
Changes in level between 1/4 inch (6.4 mm) and 1/2 inch (12.7 mm) shall be beveled with a slope no greater than one unit vertical in 2 units horizontal (50-percent slope) [see Figure 11B...
-
3. Exception to Ramp Running Slope
The maximum slope for a ramp in the 2010 Standards is a rise of 1 vertical inch for each 12 inches of horizontal distance slope....
-
4.2 Stretchers
As currently designed, oxygen cylinders are typically transported in a horizontal position below the patient bed surface, consuming critical vertical height....
-
Trail Study Sites
Within 1.5 m (5 ft) (horizontal distance) of the waterline, the stability of the sand was deemed inadequate for supporting the SEWF....
-
Meeting Purpose
Should there be any modifications of the typical plan, if for example: Review options for horizontal evacuation such as moving out to a parking structure or using elevators at other...
-
1.5 Materials
When in place, the front edge of each detectable warning was positioned 1.22 m (4 ft) behind the front edge of the sidewalk and was centered horizontally on the sidewalk section....
-
XI. Overview of Americans with Disabilities Act Accessibility Guidelines for New Construction and Alterations
Dispersal of wheelchair seating in theaters is required where there are more than 300 seats....
-
11B-223 Medical care and long-term care facilities
In this case the dispersion requirement in Section 11B-223.2.1 does not trigger additional accessible rooms that would result in exceeding the minimum requirement for the building....
-
382.61 What are the requirements for movable aisle armrests?
an equivalent alternative request concerning movable armrests must show the Department that, in fact, persons with mobility impairments using aisle and boarding wheelchairs can transfer horizontally...
-
17 Inch Low Height
The safest and most easily accessible transfers are those with no or very little horizontal and vertical distance between the seat of the wheelchair and the transfer surface....
-
Guidelines for Requirement 6
A number of commenters requested that the Department specify the dimensions for grab bar reinforcement, and suggested that grab bar reinforcing material run horizontally throughout the entire...