Clearance around a water closet shall be 60 inches (1524 mm) minimum measured perpendicular from the side wall and 56 inches (1422 mm) minimum measured perpendicular from the rear wall....
Search Results "Assurances from Contractors"
-
11B-604.3.1 Size
-
GRADE (Adjacent Ground Elevation)
elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property line is more than 5 feet (1524 mm) from...
-
GRADE (Adjacent Ground Elevation)
elevation of the finished surface of the ground, paving or sidewalk within the area between the building and the property line or, when the property line is more than 5 feet (1524 mm) from...
-
Location: ADA Standard Section 604.2
Section 604.2 covers the current ADA Standards for the mounting location of water closets.
-
COMMENTS
By deleting specific provisions from the rule, the Department gives full recognition to this principle....
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
Rebuilding Together Silicon Valley - San Jose, CA
Through a vast network of volunteers, corporate sponsors, and sub-contractors, Rebuilding Together Silicon Valley (RTSV) provides critical home repairs to over 300 clients per year. ...
-
Ability360 - Phoenix, AZ
Americans with Disabilities Act (ADA) Training and Counsel Outreach to Rehabilitation Centers and Early Intervention for Newly-Disabled Individuals Reintegration from...
-
b) Sidewalks
Consistent with guidance from the Department of Justice ("DOJ"), the City also prioritizes locations based on citizen requests, requiring that requests from the disabled community be given...
-
11B-104.1.1 Construction and manufacturing tolerances
Information on specific tolerances may be available from industry or trade organizations, code groups and building officials, and published references. ◼ Advisory 11B-104.1.1 Construction...
-
Meeting ANSI Standard S12.60 Requirements
If the bulk of the installed sound-absorbing material is on the ceiling and there is no possibility for wall treatment, installed furnishings such as bookshelves, assure that sound waves...
-
2.5 Visual Detection Distance
For this analysis, we assumed that participants who could see a particular detectable warning from a greater distance could also see it from closer distances....
-
CHAPTER 9 FIRE PROTECTION AND LIFE SAFETY SYSTEMS
ETA Editor's Note Sections from California Building Code Chapter 9 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
11B-703.5.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
11B-703.2.4 Character proportions
Characters shall be selected from fonts where the width of the uppercase letter “O” is 60 percent minimum and 110 percent maximum of the height of the uppercase letter “I”....
-
CHAPTER 9 FIRE PROTECTION SYSTEMS
ETA Editor's Note Sections from California Building Code Chapter 9 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
CHAPTER 10 MEANS OF EGRESS
ETA Editor's Note Sections from California Building Code Chapter 10 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
CHAPTER 31 SPECIAL CONSTRUCTION
ETA Editor's Note This Guide contains only the excerpts from California Building Code Chapter 31 that are adopted by Division of the State Architect - Access Compliance (DSA-AC)....
-
CHAPTER 33 SAFEGUARDS DURING CONSTRUCTION
ETA Editor's Note This Guide contains only the excerpts from California Building Code Chapter 33 that are adopted by Division of the State Architect - Access Compliance (DSA-AC)....
-
CHAPTER 10 MEANS OF EGRESS
ETA Editor's Note Sections from California Building Code Chapter 10 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
-
CHAPTER 1 SCOPE AND ADMINISTRATION
ETA Editor's Note This Guide contains only the excerpts from California Building Code Chapter 1 that are adopted by Division of the State Architect - Access Compliance (DSA-AC)....
-
CHAPTER 2 DEFINITIONS
ETA Editor's Note Sections from California Building Code Chapter 2 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted....
