Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
Search Results "Work Surface"
-
1011.5.1 Fire Building Surfaces
-
409.4.2 Floor Surfaces
409.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
- Miracle Sealant Slip-Resistant Flooring Treatment
-
Part I. A Longitudinal Study of Trail Surfaces Final Report
A Longitudinal Study of Trail Surfaces Final Report...
-
Part II. National Trail Surface Survey Final Report
National Trail Surface Survey Final Report...
-
Clear Width [§405.5]
Employee Work Areas Common use circulation paths must be accessible in work areas 1,000 sq. ft. or more in size....
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
11B-405.3 Cross slope
Cross slope is the slope of the surface perpendicular to the direction of travel....
-
Installation of Test Surfaces
Installation of Test Surfaces In accordance with standard EWF design and construction practice (Figure 2), the full depth surfaces were prepared to the same requirements needed for permanent...
-
Installation of Aggregate Surfaces at Bradford Woods
Installation of Aggregate Surfaces at Bradford Woods The installation of the aggregate surfaces at Bradford Woods conformed to the following protocol: Prior to installing the crushed...
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
- Envirobond is Self-Healing
- Organic-Lock: The Self-Healing Organic Binder
- Envirobond Deters Weeds
-
A4.5.1 GENERAL
Wheelchairs can be propelled most easily on surfaces that are hard, stable, and regular....
-
11B-305.2 Floor or ground surfaces
Floor or ground surfaces of a clear floor or ground space shall comply with Section 11B-302....
-
R302.7 Surfaces
R302.7 Surfaces....
- Cargill, Incorporated SafeLane® Surface Overlay CA-48
-
M301.2 Transfer Surface (Section-by-Section Analysis)
This is an introductory section.
-
Surfaces (R302.7) (Section-by-Section Analysis)
Vertical surface discontinuities (i.e., vertical difference in level between two adjacent surfaces, see R105.5) must be 13 millimeters (0.5 inch) maximum....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
409.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....
-
Rollability and Smoothness of Walking Surfaces
surfaces....
-
Summary: What Every Playground Owner Should Know About the Accessibility of Their Playground Surfaces
Decision makers should engage with suppliers to gather information on various surfaces and evaluate surface options....