Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
Search Results "Work Surface"
Filters
Commonly Searched Documents
-
11B-1008.2.5.3.1 Handrail gripping surfaces
-
Transfer Surface
Part of diagnostic equipment onto which patients who use mobility devices or aids transfer when moving onto and off of the equipment.
-
Transfer Surface
Part of diagnostic equipment onto which patients who use mobility devices or aids transfer when moving onto and off of the equipment.
-
Test Courses & Surfaces
Test Courses & Surfaces Test courses were designed and built using nine different types of exterior surfaces (Table 1)....
-
Surface
The top layer of ground on a recreation site, ORAR, trail, or beach access route.
-
11B-502.4 Floor or ground surfaces
Advisory 11B-502.4 Floor or ground surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
Clear Width [§405.5]
Employee Work Areas Common use circulation paths must be accessible in work areas 1,000 sq. ft. or more in size....
-
Stabilized Engineered Wood Fiber for Accessible Playground Surfaces
Winandy Abstract Playground surfaces of sand, pea gravel, and engineered wood fiber (EWF) provide some level of impact protection for children....
-
Legislation
the footrest than the poured concrete surface....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
11B-410.2 Floor surfaces
Floor surfaces in platform lifts shall comply with Sections 11B-302 and 11B-303....
-
Observations and Results
Field Observations A wheelchair user on the beach path described the Vitri-Turf surface as "nice and firm" and the Soil-Sement surface as "kind of soft"( Fig. 12)....
-
Stable
A surface is not permanently affected by expected weather conditions and can sustain normal wear and tear from the expected use(s) of the area, between planned maintenance....
-
M304.2 Standing Surface
The surface on which the patient stands shall be slip resistant....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
11B-609.5 Surface hazards
Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
-
M304.2 Standing Surface
Equipment surfaces on which patients stand must comply with M304.2...
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
1011.5.1 Fire Building Surfaces
Fire building surfaces shall be 9 inches (230 mm) minimum above the ground....
-
409.4.2 Floor Surfaces
409.4.2 Floor Surfaces. Floor surfaces in elevator cars shall comply with 302 and 303....
-
INTRODUCTION
, the surface returns to its original condition; Firmness – the degree of surface resistance to deformation, especially by indentation or the movement of objects; and Slip-resistance...
-
Miracle Sealant Slip-Resistant Flooring Treatment
professional grade penetrating sealer designed for the slip-protection of all ceramic tile, porcelain tile, polished marble, polished granite, concrete, masonry and other acid sensitive surfaces...
