required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...
Search Results "Full Length Mirror"
Filters
Commonly Searched Documents
-
11B-221.2.3.1 Horizontal dispersion
-
406.8--Modification to 406 of Appendix D to 36 CFR Part 1191
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Pilot Rock WPTS Square Frame Table Using Recycled Plastic
Full length seats offer full capacity seating which is an advantage over extended top or side access tables....
-
Pilot Rock WPTS Square Frame Table Using Lumber
Full length seats offer full capacity seating which is an advantage over extended top or side access tables....
-
11B-406.5.3 Landings
The landing clear length shall be 48 inches (1219 mm) minimum....
-
5.8.1.1 Clear Platform Size
The platform should be a minimum clear width of 32-inches and a minimum clear length of 40-inches....
-
1018.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1018.7.1) and cross slope (1018.7.2) of beach access routes....
-
Boarding Piers at Boat Launch Ramps: ADA Standard Section 1003.2.2
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
11B-502.6.4.2
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
Bobrick MatrixSeries Surface-Mounted Soap Dispenser B-5050
Concealed wall/mirror mounting. Large-capacity container: 50‑fl oz (1.5‑L). Unit 6" W, 8 1/8" H (150 x 205mm); wall to push-button, 4" (100mm)....
-
§ 36.309(b)(2)
(2) Required modifications to an examination may include changes in the length of time permitted for completion of the examination and adaptation of the manner in which the examination is...
-
Sec.36.309(b)(2)
(2) Required modifications to an examination may include changes in the length of time permitted for completion of the examination and adaptation of the manner in which the examination is...
-
1016.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1016.7.1) and cross slope (1016.7.2) of outdoor recreation access routes....
-
Boarding Pier Clearances
Boarding Pier Clearances The entire length of accessible boarding piers must comply with the same technical provisions that apply to boat slips....
-
Unified Facilities Guide Specifications
The straightedge is to be held in contact with the surface and moved ahead one - half of the length of the straightedge for each successive measurement....
-
Conclusions
A depth of 15in. for a seating surface was found to be suitable based on median values of buttock-popliteal length and wheelchair seat depths....
-
1017.4 Passing Spaces
Where the full length of a trail does not fully comply with the technical requirements in 1017, a passing space is required to be located at the end of the trail segment that fully complies...
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
11B-505.6 Gripping surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
7.4.3.1 Running Slope (Grade)
No more than 30 percent of the total trail length may exceed a running slope (grade) of 1:12 (8.33 percent)....
-
§382.133(e)(2)
(2) The maximum weight and dimensions (length, width, height) of the device to be used by an individual that can be accommodated in the aircraft cabin consistent with FAA safety requirements...
-
§ 38.29(c)
(c) For vehicles in excess of 22 feet in length, overhead handrail(s) shall be provided which shall be continuous except for a gap at the rear doorway....
-
406.8 Detectable Warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
