Non-rail vehicles that are equal to or less than 25 feet (7.6 m) in length....
Search Results "Full Length Mirror"
-
Small non-rail vehicle
-
F221.2.3.1 Horizontal Dispersion
shall not be required in assembly areas with 300 or fewer seats if the companion seats required by F221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...
-
Construction Specification Institute
For longitudinal lines, measurements were to be taken in minimum 5 - foot lengths running parallel to the long dimension, with one measurement line per 3 feet of width and within 2 feet...
-
M305.3.1.3 Vertical Position
The length of the gripping surface on vertical standing supports shall be 18 inches (455 mm) minimum....
-
Bradley In-Wall Towel Dispenser 198
Satin finish Stainless Steel Towel dispenser For Installation Behind Wall or Mirror For 1/2" Thick Drywall Installation For 5/8" Thick Drywall, use...
-
11B-812.6 Vehicle spaces
Exceptions: Where the long dimension of vehicle spaces is parallel to the traffic flow in the adjacent vehicular way, the length of vehicle spaces shall be 240 inches (6096 mm) minimum...
-
11B-812.6 Vehicle spaces
Exceptions: Where the long dimension of vehicle spaces is parallel to the traffic flow in the adjacent vehicular way, the length of vehicle spaces shall be 240 inches (6096 mm) minimum...
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....
-
1133A.4, Item 2
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for a work surface....
-
Gamco Horizontal Wall-Mounted Baby Changing Station Cream - BCS-1
Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included....
-
Gamco Horizontal Wall-Mounted Baby Changing Station Grey - BCS-2
Reinforced full-length steel-on-steel hinge mechanism, with 11-gauge steel mounting plates and mounting hardware included....
-
Plan 3A: 12-Foot Wide Accessible Guest Room
bathroom: • Comparable vanity counter top space (section 806); • Bathtub (section 607.2); • Removable bathtub seat (section 607.3); • Clearance in front of the bathtub extends its full...
-
Plan 1A: 13-Foot Wide Accessible Guest Room
top space (section 806); • Bathtub with a lavatory at the control end (section 607.2); • Removable bathtub seat (section 607.3); • Clearance in front of the bathtub extends its full...
-
Plan 1B: 13-Foot Wide Accessible Guest Room
top space (section 806); • Bathtub with a lavatory at the control end (section 607.2); • Removable bathtub seat (section 607.3); • Clearance in front of the bathtub extends its full...
-
T602 Wheelchair Spaces
Under the final rule, as with the existing guidelines, one full unobstructed side of each wheelchair space must adjoin or overlap a passenger access route. See T602.3....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
Handrail Extensions: ADA Standard Section 505.10
Section 505.10 covers the current ADA Standards for handrail extensions.
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
406.8--Modification to 406 of Appendix D to 36 CFR Part 1191
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
1133A.4, Item 1
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation....
-
1017.7 Slopes
This section contains technical requirements for the maximum running slope and segment length (1017.7.1) and cross slope (1017.7.2) of trails....
-
1133A.4, Item 1
A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen sink installation....
