Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an area...
Search Results "Full Length Mirror"
Filters
Commonly Searched Documents
-
T402.2 Design Load
-
11B-502.6.4.1
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
11B-502.6.4.1
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
§ 37.131(f)(3)(i)(C)
(C) Substantial numbers of trips with excessive trip lengths....
-
11B-904.4 Sales and service counters
permitted to have a portion which is 24 inches (610 mm) long minimum complying with Section 11B-904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces Recommendations
Recommendations The Committee recommends standing supports located on both sides of platforms, a minimum of 34 inches between supports, integrated into the platform, and 32-inch minimum length...
-
Transfer Supports Location and Configuration M301.3 and M302.3
The length of the transfer support shall be a minimum of 15 inches long and positioned so that the transfer support overlaps the length of the transfer surface by 80% at a maximum distance...
-
Sec.36.401(c)(1)
(1) Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements....
-
203.15.1
203.15.1 Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements....
-
§ 37.41(b)(1)
(1) Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements....
-
11B-812.1 General
Exception: Where vehicle spaces or access aisles are not adjacent to another vehicle space, access aisle, or parking space, measurements shall be permitted to include the full width of the...
-
11B-705.1.2.2.2 Parallel curb ramps
Detectable warnings shall extend the full width of the turning space at the demarcation between the street and the sidewalk less 2 inches (sic) (51 mm) maximum on each side....
-
11B-502.6.4.1
The centerline of the International Symbol of Accessibility shall be a maximum of 6 inches (152 mm) from the centerline of the parking space, its sides parallel to the length of the parking...
-
§ 35.151(a)(2)(i)
(i) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements....
-
§ 36.401(c)(1)
(1) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements....
-
§ 35.151(a)(2)(i)
(i) Full compliance with the requirements of this section is not required where a public entity can demonstrate that it is structurally impracticable to meet the requirements....
-
Wikk Industries Inc. Push Plate 6 Inch ROUND SWITCHES
Special Material and Finishes available: US32 (629) Mirror Stainless Steel US3 (605) Bright Mirror Brass (uncoated) US4 (606) Satin Brass (uncoated) US10B (613) Dark Oxidized Satin Brass...
-
Wikk Industries Inc. Push Plate PART# BPS SM PRP36 CL (628)
gang only) Can be ordered for Pneumatic operation (PN) All 4-1/2" square switches can be mounted on square bollards OPTIONS: Special Material and Finishes Available US32 (629) Mirror...
-
Wikk Industries Inc. Push Plate 4 1/2 Inch ROUND SWITCHES
within A.D.A. requirements Compatible with single gang boxes All 4-1/2" round switches can be mounted on square bollards OPTIONS: Special Material and Finishes Available: US32 (629) Mirror...
-
II. GENERAL NONDISCRIMINATION REQUIREMENTS
Failing or refusing to make alterations to QuikTrip Stores in full compliance with 42 U.S.C. § 12183(a)(2), 28 C.F.R. §§ 36.402 - 36.406, and the ADA Standards; d....
-
AJW Architectural Products U646 Series Lever Operated Roll Towel Dispenser & Waste Receptacle Combination - Recessed
Cabinet Doors: Fabricated of #22 ga stainless steel with #4 satin finish, with full length door stop to reduce vandalism Towel Dispenser: Roll towel mechanism is fabricated of #20 ga...
-
4.8.4(2)
(2) The landing length shall be a minimum of 60 in (1525 mm) clear....
-
Plan 3A: 12-Foot Wide Accessible Guest Room
bathroom: • Comparable vanity counter top space (section 806); • Bathtub (section 607.2); • Removable bathtub seat (section 607.3); • Clearance in front of the bathtub extends its full...
-
Plan 1A: 13-Foot Wide Accessible Guest Room
top space (section 806); • Bathtub with a lavatory at the control end (section 607.2); • Removable bathtub seat (section 607.3); • Clearance in front of the bathtub extends its full...
