This provision mirrors existing 508 Standards § 1194.21(b)....
Search Results "Full Length Mirror"
Commonly Searched Documents
-
502.2.2 No Disruption of Accessibility Features (Section-by-Section Analysis)
-
Clear Width: ADA Standard Section 403.5.1
Section 403.5.1 covers the current ADA Standards for the clear width of walking surfaces that are part of an accessible route.
-
11B-505.2 Where required
At door landings, handrails are not required when the ramp run is less than 6 inches (152 mm) in rise or 72 inches (1829 mm) in length....
-
11B-904.4.1 Parallel approach
A clear floor or ground space complying with Section 11B-305 shall be positioned for a parallel approach adjacent to the 36 inch (914 mm) minimum length of counter....
- Bobrick ClassicSeries Recessed Paper Towel Dispenser B-359
-
§ 1194.25(j)(1)
(1) The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion...
-
The Purpose of FSORAG and FSTAG
Compliance with FSORAG and FSTAG does not mean that all recreation areas and trails will be accessible to all persons with disabilities; in some locations, the natural environment will prevent full...
-
Features of Accessible Parking Spaces
Access aisle width is at least 60 inches, must be at the same level and the same length as the adjacent parking space(s) it serves, maximum slope in all directions is 1:48, and access aisle...
- HEWI Range 250 Door Hardware
-
11B-805.4.3 Turning space
Refer to the following examples: Exam room - Exam rooms are required to provide a turning space, accessible handwashing fixture, and 36-inch wide access along the full length of each...
-
11B-805.4.3 Turning space
Refer to the following examples: Exam room - Exam rooms are required to provide a turning space, accessible handwashing fixture, and 36-inch wide access along the full length of each...
- Gamco Surface-Mounted Sanitary Napkin Disposal - ND-1
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment. ◼...
-
C101.2 Equivalent Facilitation (Section-by-Section Analysis)
C101.2 Equivalent Facilitation (Section-by-Section Analysis) This proposed section addresses when telecommunications equipment manufacturers may use equivalent facilitation, and mirrors...
-
11B-405.7.2.1
Where the ramp width is less than the top landing width additional landing length may be necessary to accommodate handrail extensions required to be in the direction of the ramp run without...
-
1133A.4 Countertops
Kitchen countertops shall comply with this section and shall be provided with the following: A minimum linear length of 30 inches (762 mm) of countertop shall be provided for the kitchen...
-
11B-403.7 Continuous gradient
All walks with continuous gradients shall have resting areas, 60 inches (1524 mm) in length, at intervals of 400 feet (121,920 mm) maximum....
-
§ 38.29(f)
(f) For vehicles in excess of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches....
-
§ 37.135(d) Phase-in of implementation
Each plan shall provide full compliance by no later than January 26, 1997, unless the entity has received a waiver based on undue financial burden....
- ASI Storage Solutions Traditional Plus Locker
- Bradley Behind Thick Drywall Towel Dispenser Multi-Purpose Unit 1985
-
Vertical Alignment-Crest Vertical Curves
distance greater than length of vertical curve (S>L) Case 2-Sight distance less than lenght of vertical curve (S>L) For both equations, L = length of vertical curve...
-
4.34.2(12)
(12) At least one full bathroom shall comply with 4.34.5. A full bathroom shall include a water closet, a lavatory, and a bathtub or a shower....
-
M301.3 Transfer Supports
* Other Transfer Support Dimensions: (*not included in the Proposed Rule) • Sub-committee Recommendation: Length - At least 15 inches (300 mm) in length and located on the length...