distance greater than length of vertical curve (S>L) Case 2-Sight distance less than lenght of vertical curve (S>L) For both equations, L = length of vertical curve...
Search Results "Full Length Mirror"
-
Vertical Alignment-Crest Vertical Curves
-
M301.3 Transfer Supports
* Other Transfer Support Dimensions: (*not included in the Proposed Rule) • Sub-committee Recommendation: Length - At least 15 inches (300 mm) in length and located on the length...
-
4.34.2(12)
(12) At least one full bathroom shall comply with 4.34.5. A full bathroom shall include a water closet, a lavatory, and a bathtub or a shower....
-
703.4.1 Height above Finish Floor or Ground
Figure 703.4.1 Height of Tactile Characters above Finish Floor or Ground ETA Editor’s Note: This figure, though mirroring the ADA Figure, is incorrect in showing Braille characters...
-
Gamco Recessed Seat-Cover Dispenser - TSC-2
Doors provided with tumbler lock and full length stainless steel piano-hinge. One piece flange provided with 1/4" (6mm) return for rigidity. All welded construction....
-
Gamco Surface-Mounted Paper Cup Dispenser - CD-1
Secured to mounting plate with a full-length stainless steel piano-hinge. Unit is adjustable to dispense 3- to 6-oz (0.1- to 0.2‑L) paper or plastic flat-bottom cups....
-
Technically Infeasible
that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full...
-
Automatic and Power-Assisted Doors and Gates: ADA Standard Section 404.3
Section 404.3 covers the current ADA Standards for automatic and power-assisted doors and gates.
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
1132A.5.1 General
The floor or landing on the dwelling unit side of the primary entry door and any required exit door shall have a minimum length of not less than 44 inches (1118 mm)....
-
Accessible Routes: ADA Standard Section 1005.1
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9145 mm) minimum, gangways shall not be required to comply with 405.2...
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
11B-1005.1 Accessible routes
Where the total length of the gangway or series of gangways serving as part of a required accessible route is 30 feet (9144 mm) minimum, gangways shall not be required to comply with Section...
-
11B-809.10.7.2 Location
The centerline of the water closet shall be 17 inches (432 mm) minimum to 18 inches (457 mm) maximum from a wall or partition that is 54 inches (1372 mm) minimum in length....
-
Clarification on Standard Roll-In Shower Compliance
roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides with a full...
-
11B-809.10.7.3 Reinforcement for grab bars
The backing shall 40 (sic) inches (1016 mm) minimum in length....
-
11B-405.7.5 Doorways
Where a door swings onto a ramp landing width, additional ramp landing length as specified may be necessary to accommodate a clear level area for the wheelchair user to clear the door swing...
-
11B-405.7.5 Doorways
Where a door swings onto a ramp landing width, additional ramp landing length as specified may be necessary to accommodate a clear level area for the wheelchair user to clear the door swing...
-
11B-809.10.7.3 Reinforcement for grab bars
The backing shall 40 (sic) inches (1016 mm) minimum in length....
-
ASI Storage Solutions Angle Frame Locker
The diamond stamped ventilation holes assure the free flow of air, to reduce odor build-up, and full visibility of locker contents....
-
AJW Architectural Products U2324 Unidoor C-fold/Multifold Towel Dispenser - Recessed
Full length one piece door with 1/2" returns inside cabinet to prevent injury when reaching for towels....
-
5.9.2.1 Standing Supports on Single Ramped Entry Raised Platforms with Wheelchair Spaces
Standing supports should be located on both sides of platforms, a minimum of 34 inches between supports, integrated into the platform, and 32 inches minimum length (at least 80% of the platform...
-
Gamco Recessed Towel Dispenser - TD-4
Door mounted on full length stainless steel piano-hinge and provided with tumbler lock. All welded construction. Capacity: 350 C-fold or 475 multi-fold towel capacity....
