Recommendations Based on the data in Table 1 and the observations above, we recommend: a minimum flat surface of 40 in. length for platforms accommodating wheeled mobility devices...
Search Results "Full Length Mirror"
Filters
Commonly Searched Documents
-
Recommendations
-
ยง 38.25(c) Door height
For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift platform, or highest point of a ramp, shall be a minimum of 68...
-
Neo-Metro Commercial Curved Front, Wall Mounted System M2 Basin 8980 Series
The units include a full length trap enclosure to conceal hot and cold mixing valve assembly and P-trap(s). Hardware is supplied to secure the fixture to the wall....
-
Parallel Approach: ADA Standard Section 904.4.1
A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter. , EXCEPTION: Where the provided...
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
Rise
The maximum length of a run is determined by the rise (30 inches maximum) and the slope: Max. Rise Slope Max. Length Max. Rise Slope Max....
-
Handrails
The guidelines require handrails to be continuous within the full length of stair flights and ramp runs (505.3)....
-
222.1 General
For example, in a physician's office, if people without disabilities must traverse the full length of the office suite in clothing other than their street clothes, it is acceptable for people...
-
11B-502.1 General
Exception: Where parking spaces or access aisles are not adjacent to another parking space or access aisle, measurements shall be permitted to include the full width of the line defining...
-
11B-208.2.3.3 Parking for guests, employees, and other non-residents
Chapter 11A indicates designated accessible parking for the adaptable residential dwelling units shall be provided on requests of residents with disabilities on the same terms and with the full...
-
30. Authority
Authority Each of the Parties represents, warrants and agrees that he, she or it has the full right and authority to enter into this Settlement Agreement, and that the person executing...
-
AJW Architectural Products U6184 Unidoor C-fold/Multifold Towel Dispenser & Waste Receptacle Combination - Recessed
Uni-Door: Fabricated of #18 ga stainless steel with #4 satin finish with full length door stop to prevent vandalism Towel Dispenser: Dispensing area has hemmed edges to prevent injury...
-
AJW Architectural Products U640 Series C-fold/Multifold Towel Dispenser & Waste Receptacle Combination - Recessed
Cabinet Door: Fabricated of #22 ga stainless steel with #4 satin finish with full length door stop to prevent vandalism Towel Dispenser: Dispensing area has hemmed edges to prevent injury...
-
AJW Architectural Products U230 Series C-fold/Multifold Towel Dispenser - Recessed
Full length door stops protect door from vandalism....
-
Running Slope [1017.7.1]
Trails or trail segments of any length may be constructed with running slopes up to 1:20 (5 percent)....
-
Sales and Service Counters: ADA Standard Section 904.4
shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
-
Landings: ADA Standard Section 406.4
Section 406.4 covers the current ADA Standards for curb ramp landings.
-
221.2.3.1 Horizontal Dispersion
shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...
-
Running Slope [1018.7.1]
When the running slope of a segment of beach access route is steeper than 1:20 (5 percent), the maximum length of the segment is specified in table 6, and a resting interval must be provided...
-
221.2.3.1 Horizontal Dispersion
shall not be required in assembly areas with 300 or fewer seats if the companion seats required by 221.3 and wheelchair spaces are located within the 2nd or 3rd quartile of the total row length...
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
Sec.36.401(c)(1)
(1) Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements....
-
203.15.1
203.15.1 Full compliance with the requirements of this section is not required where an entity can demonstrate that it is structurally impracticable to meet the requirements....
