ETA Editor's Note With the revisions to scoping requirements in Subsections 11B-213.3.1 through 11B-213.3.4 implemented by the 2013 CBC Supplement dated July 1, 2015, DSA-AC has increased...
Search Results "9-1-1 Service"
-
11B-213.3.4 Lavatories
-
M305.2.7 Clearance (Section-by-Section Analysis)
Specifically, the Access Board sought input from the public in question 22, on whether transfer supports on diagnostic equipment could provide 1½ inches minimum clearance around the gripping...
-
Accessible Routes on the Playing Surface
When the accessible route is provided on the course, a 1-inch high maximum curb is permitted for an opening of 32 inches minimum where the accessible route extends outside the hole....
-
4.9.4 HANDRAILS
Handrails shall comply with 4.26 and shall have the following features: (1) Handrails shall be continuous along both sides of stairs....
-
Features of Accessible Parking Spaces
Notes: 1....
-
1.1.6
limits on whole body vibration as established in ISO 2631, Evaluation of Human Exposure to Whole - Body Vibration were not exceeded if the bevel on the units was less than or equal to 6 mm (1/...
-
11B-603.2.3 Door swing
Exceptions: 1. Reserved. [2010 ADAS] 1. ...
-
A4.32.4 HEIGHT OF WORK SURFACES
chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 * All dimensions are based on a work-surface thickness of 1-...
-
68.31. Variance Procedures
(Effective June 1, 1994, 19 TexReg 3485; amended effective May 6, 1998, 23 TexReg 4263; amended effective June 26, 2000, 25 TexReg 6122; repealed effective November 5, 2001, 26 TexReg 8807...
-
Standards Applicable Prior to March 15, 2012
We announce, through this notice, that we will permit, but not require, recipients to use the 2010 Standards as adopted in the Title II regulations, except that Exception (1) in Section...
-
State Narrative Crash Data
Driver 1 stated that child skated from his blind spot directly in front of vehicle. Driver 1 stated he did not see the child until the collision."...
-
11B-233.3.2 Residential dwelling units for sale
Note to Reader: The Department of Justice’s ADA standards also require the following: §35.151(j) Facilities with residential dwelling units for sale to individual owners. 1)...
-
Construction and Manufacturing Tolerances: ADA Standard Section 104.1.1
Section 104.1.1 of the ADA Standards covers the most current information on dimensions in regards to construction and manufacturing tolerances in the ADA Standards.
-
Swimming Pools: ADA Standard Section 242.2
Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.
-
11B-403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
11B-233.3.2 Residential dwelling units for sale
Note to Reader: The Department of Justice’s ADA standards also require the following: §35.151(j) Facilities with residential dwelling units for sale to individual owners. 1)...
-
11B-403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
11B-233.1 General
§35.102(a) “this part applies to all services, programs or activities provided or made available by public entities....
-
11B-233.1 General
§35.102(a) “this part applies to all services, programs or activities provided or made available by public entities....
-
Section 36.302 Modifications in Policies, Practices, or Procedures (Preamble, Section-by-Section Analysis)
Section 36.302(c)(1) requires that a public accommodation modify its policies, practices, or procedures to permit the use of a service animal by an individual with a disability in any area...
-
Section 36.302 Modifications in Policies, Practices, or Procedures (Section-By-Section Analysis and Response to Comments)
Section 36.302(c)(1) requires that a public accommodation modify its policies, practices, or procedures to permit the use of a service animal by an individual with a disability in any area...
-
R405.2.1 General
Space under an element between the finish surface and 230 mm (9 in) above the finish surface shall be considered toe clearance and shall comply with R405.2....
-
§100.201 Definitions.
[54 FR 3283, Jan. 23, 1989, as amended at 69 FR 18803, Apr. 9, 2004; 73 FR 63615, Oct. 24, 2008] As used in this subpart:...
-
§382.113 What services are carriers not required to provide to passengers with a disability on board the aircraft?
As a carrier, you are not required to provide extensive special assistance to qualified individuals with a disability. For purposes of this section, extensive special assistance...