Accessible Ramp Features 1. At least 36 inches between handrails 2. Top landing part of walk 3. Bottom landing part of walk 4. Handrail height 34 to 38 inches 5....
Search Results "9-1-1 Service"
-
Accessible Ramp Features
-
504.4 Templates
provided, templates allowing content creation that conforms to all Level A and Level AA Success Criteria and all Conformance Requirements in WCAG 2.0 (incorporated by reference in Chapter 1)...
-
1991 ADA Standards for Accessible Design
Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities Excerpt from 28 CFR Part 36: ADA Standards for Accessible Design Revised as of July 1,...
-
4.21.7 CURBS
If provided, curbs in shower stalls 36 in by 36 in (915 mm by 915 mm) shall be no higher than 1/2 in (13 mm)....
-
2.8 Openings
Openings in the surface of ORARs shall be small enough to prevent passage of a 1/2 inch (13 mm) diameter sphere....
-
502.4 Floor or Ground Surfaces
EXCEPTION: Slopes not steeper than 1:48 shall be permitted. ...
-
§100.7(a)(2)
(2) For purposes of determining liability under paragraphs (a)(1)(ii) and (iii) of this section, prompt action to correct and end the discriminatory housing practice may not include any...
-
2.4.1.2
A grade of up to 1:12 (8.33 percent) is permitted for up to 50 feet (15 m) of an ORAR....
-
1991 / 1994 ADA Standards - Plan Review Tool - Doors
1991 / 1994 ADA Standards - Plan Review Tool - Doors Click here to view/download the pdf, Page 1 of 2 (256 KB) Click here to view/download the pdf, Page 2 of 2 (272 KB) * * * *...
-
Car Controls [§407.4.6 and §407.4.7]
Car Controls [§407.4.6 and §407.4.7] If more than one car control panel is provided in a car, both must comply (except in existing cars where only 1 panel must comply)....
-
§ 37.167(h)
traveling with a respirator or portable oxygen supply, consistent with applicable Department of Transportation rules on the transportation of hazardous materials (49 CFR subtitle B, chapter 1,...
-
§ 38.123(a)
required by §38.111 (a) and (e) of this part, it shall be designed so as to allow a person using a wheelchair or mobility aid to enter and use such restroom as specified in paragraphs (a) (1)...
-
ACCESSIBILITY
[DSA-AC & HCD 1-AC] Accessibility is the combination of various elements in a building, facility, site, or area, or portion thereof which allows access, circulation and the full use...
-
ACCESSIBILITY
[DSA-AC & HCD 1-AC] Accessibility is the combination of various elements in a building, facility, site, or area, or portion thereof which allows access, circulation and the full use...
-
Sargent 11 Line Lever Lock
The SARGENT® 11 Line sets a higher standard for Grade 1 bored-in locks....
-
DOJ/DOT Joint Technical Assistance on the Title II of the ADA Requirements to Provide Curb Ramps when Streets, Roads, or Highways are Altered through Resurfacing
Yerusalim, 9 F 3d 1067 (3rd Cir. 1993). ...
-
Closed movie captioning (Section-by-Section Analysis)
The Department notes that the term “closed captioning” is referenced in the examples of auxiliary aids and services in § 36.303(b). ...
-
Section 37.151 Waiver for Undue Financial Burden
Section 37.151 Waiver for Undue Financial Burden The Department has adopted a five-year phase-in for paratransit service....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
§104.3 Definitions.
[45 FR 30936, May 9, 1980, as amended at 65 FR 68054, Nov. 13, 2000; 82 FR 31912, July 11, 2017] As used in this part, the term:...
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
-
306.2.1 General
Space under an element between the finish floor or ground and 9 inches (230 mm) above the finish floor or ground shall be considered toe clearance and shall comply with 306.2....
