Within nine (9) months of the entry of this Consent Decree, the ILA will survey all emergency shelters in the County using the survey instrument entitled ADA Checklist for Emergency Shelters...
Search Results "9-1-1 Service"
-
J. PHYSICAL CHANGES TO EMERGENCY SHELTERS
-
What Testing Accommodations Must Be Provided?
effective in affording equal opportunity to obtain the same result, to gain the same benefit, or to reach the same level of achievement as that provided to others, 28 C.F.R. § 35.130(b)(1)...
-
Section 35.150(b)(2) Safe Harbor (Section-by-Section Analysis)
Under the "program accessibility" requirement in title II, each service, program, or activity, when viewed in its entirety, must be readily accessible to and usable by individuals with disabilities...
-
Safe Harbor is applied element by element in existing facilities
1) An existing place of public accommodation (facility) has an element type that was constructed and/or last altered before 3/15/2012 and that fully complies with the 1991 ADA Standard. ...
-
2.6 Conspicuity Ratings
Participants rated the conspicuity of each detectable warning that they could see on a numerical scale that ranged from 1 (very unlikely to attract my attention on this type of sidewalk)...
-
Section 36.302 Modifications in Policies, Practices, or Procedures (Preamble, Section-by-Section Analysis)
Section 36.302(c)(1) requires that a public accommodation modify its policies, practices, or procedures to permit the use of a service animal by an individual with a disability in any area...
-
Section 36.302 Modifications in Policies, Practices, or Procedures (Section-By-Section Analysis and Response to Comments)
Section 36.302(c)(1) requires that a public accommodation modify its policies, practices, or procedures to permit the use of a service animal by an individual with a disability in any area...
-
1007.3.1 Start of Play
A clear floor or ground space 48 inches (1220 mm) minimum by 60 inches (1525 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
WINDER
ETA Editor's Note In conjunction with the added Exception at Section 11B-504.2, DSA-AC has adopted the following definition for Winder in Chapter 2, effective July 1, 2015: WINDER...
-
Section 4.26.4
• Section 4.26.4 of the 1991 Standards requires handrail gripping surfaces to have edges with a minimum radius of 1/8 inch....
-
407.4.4 Leveling
Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated loading to...
-
406.2 Counter Slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
5.4.7 Transfer Support Gripping Surface Clearance for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
There should be a 1½ inches minimum clearance around the gripping of transfer supports as proposed by the Access Board....
-
5.4.4 Transfer Support Distance From Transfer Surface for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be located a maximum distance of 1½ inches from the transfer surface....
-
B. Accessible Route
Is there a route to these 5% accessible fixed tables that allows at least 36" clear width and has no abrupt vertical level changes greater than 1/4"?...
-
§ 36.311(b)(2) Assessment factors
In determining whether a particular other power-driven mobility device can be allowed in a specific facility as a reasonable modification under paragraph (b)(1) of this section, a public...
-
410.6.3.2 VoIP Using SIP
interoperates with Voice over Internet Protocol (VoIP) products or systems using Session Initiation Protocol (SIP), real-time text shall conform to RFC 4103 (incorporated by reference in Chapter 1)...
-
§ 35.137(b)(2)
In determining whether a particular other power-driven mobility device can be allowed in a specific facility as a reasonable modification under paragraph (b)(1) of this section, a public...
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
E103.4 Defined Terms (Section-by-Section Analysis)
The new definition would include examples of ICT with closed functionality, such as self-service machines and fax machines....
-
R405.3.2 Maximum Depth
Knee clearance shall extend 635 mm (2.1 ft) maximum under an element at 230 mm (9 in) above the finish surface....
-
H17
Is at least 9 inches of toe clearance provided under the front wall and at least one side wall of the toilet stall? [ADA Standards § 4.17.4] Yes No...
-
§104.23 New construction.
[45 FR 30936, May 9, 1980; 45 FR 37426, June 3, 1980, as amended at 55 FR 52138, 52141, Dec. 19, 1990]...