As previously stated, the California Attorney General’s office has indicated that construction tolerance guidelines "may wrongfully be viewed by some to have the effect of law" 1 and "unnecessarily...
Search Results "9-1-1 Service"
-
5. ESTABLISHING TOLERANCE GUIDELINES
-
Accessible Routes on the Playing Surface
When the accessible route is provided on the course, a 1-inch high maximum curb is permitted for an opening of 32 inches minimum where the accessible route extends outside the hole....
-
4.9.4 HANDRAILS
Handrails shall comply with 4.26 and shall have the following features: (1) Handrails shall be continuous along both sides of stairs....
-
Features of Accessible Parking Spaces
Notes: 1....
-
1.1.6
limits on whole body vibration as established in ISO 2631, Evaluation of Human Exposure to Whole - Body Vibration were not exceeded if the bevel on the units was less than or equal to 6 mm (1/...
-
11B-215.5 Residential facilities
Where provided in residential dwelling units required to comply with Section 11B-809.5, fire alarms shall comply with Chapter 9, Section 907.5.2.3.3 and carbon monoxide alarms shall comply...
-
11B-603.2.3 Door swing
Exceptions: 1. Reserved. [2010 ADAS] 1. ...
-
A4.32.4 HEIGHT OF WORK SURFACES
chair: Manual work 26 660 27 685 Light, detailed work 28 710 31 785 * All dimensions are based on a work-surface thickness of 1-...
-
68.31. Variance Procedures
(Effective June 1, 1994, 19 TexReg 3485; amended effective May 6, 1998, 23 TexReg 4263; amended effective June 26, 2000, 25 TexReg 6122; repealed effective November 5, 2001, 26 TexReg 8807...
-
Standards Applicable Prior to March 15, 2012
We announce, through this notice, that we will permit, but not require, recipients to use the 2010 Standards as adopted in the Title II regulations, except that Exception (1) in Section...
-
State Narrative Crash Data
Driver 1 stated that child skated from his blind spot directly in front of vehicle. Driver 1 stated he did not see the child until the collision."...
-
End of Document
[FR Doc. 2016-28644 Filed 12-1-16; 8:45 am] BILLING CODE 4410-13-P...
-
305.2 Floor or Ground Surfaces
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
TAX CREDITS
A small business is one with 30 or fewer employees OR with $1 million or less in gross receipts for the preceding tax year.(3)...
-
§27.71 Airport facilities.
[61 FR 56424, Nov. 1, 1996, as amended at 68 FR 51391, Aug. 26, 2003; 78 FR 67917, Nov. 12, 2013; 80 FR 46513, Aug. 5, 2015]...
-
11B-213.2 Toilet rooms and bathing rooms
Amends Exception 1 to clarify that a unisex toilet available to all genders can be one single user or family toilet room....
-
T402.8.1 Deployment to Roadways or to Curb Height Boarding and Alighting Areas
The running slope of ramps and bridgeplates used for deployment to the roadway or to curb-height boarding and alighting areas shall be 1:6 maximum, as measured to ground level with the non-rail...
-
12206(a)(2) Publication of plan
(2) Publication of plan The Attorney General shall publish the plan referred to in paragraph (1) for public comment in accordance with subchapter II of chapter 5 of title 5 (commonly...
-
12149(a) In general
(a) In general Not later than 1 year after July 26, 1990, the Secretary of Transportation shall issue regulations, in an accessible format, necessary for carrying out this subpart (other...
-
11B-502.8 Additional signage
An additional sign shall be posted either; 1) in a conspicuous place at each entrance to an off-street parking facility or 2) immediately adjacent to on-site accessible parking and visible...
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
4.1.6(3)(a) Ramps
(a) Ramps: Curb ramps and interior or exterior ramps to be constructed on sites or in existing buildings or facilities where space limitations prohibit the use of a 1:12 slope or less may...
-
13.9 Franchised Hotel
13.9 “Franchised Hotel” means a hotel in the United States that (1) operates under one of the Brands pursuant to a franchise license agreement with HWI (or a subsidiary of HWI); (2) is not...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and ¾ inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....