) and a very small amount of loose fines coming to the surface....
Search Results "Fire-Building Surface"
-
Klingstone 400
-
Ramp
Ramp: A ramped surface was designed to insert between two steps and serve as an integrated sliding board to assist with the transfers by bridging the gap between steps. ...
-
Why test on straight courses and P-shaped turning courses?
However, the cost for producing these course designs with a number of surface materials would be very large....
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
11B-206.4.3 Entrances from tunnels or elevated walkways
Where direct access is provided for pedestrians from a pedestrian tunnel or elevated walkway to a building or facility, all entrances to the building or facility from each tunnel or walkway...
-
407.2 Contrast
Where provided, keys and controls shall contrast visually from background surfaces....
-
407.2 Contrast
Where provided, keys and controls shall contrast visually from background surfaces....
-
4.1.5(1) ENTRANCES
If a new addition to a building or facility does not have an entrance, then at least one entrance in the existing building or facility shall comply with 4.1.4, Entrances....
-
11B-206.4 Entrances
Where an alteration includes alterations to an entrance, and the building or facility has another entrance complying with 404 that is on an accessible route, the altered entrance shall not...
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
General: ADA Standard Section 208.3.1
Section 208.3.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for parking space locations.
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
Sargent 8300 Mortise Lock Exit Device
look Through-bolted trim for quiet operation and security Single door applications Double door application with Mortise Lock & Vertical Rod Device UL Fire...
-
Background
the contaminant or force is removed, the surface returns to its original condition.”...
-
Allegion Schlage CS200-Series Mechanical Locks with Tubular Interconnect
Designed for applications ranging from military housing to multi-family and small hotel/motel buildings, the CS200-Series is a lock you can depend on. ...
-
Federal Elevator 360 Passenger Elevator
The 360 elevator is the affordable answer to overcome architectural barriers in three or four level office buildings, clubs, and meeting halls, where permitted by local code....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
Specifications: APPLICATIONS - For offices, schools, hospitals, apartments, hotel/motel, residential, commercial and public buildings....
-
Literature Cited
Standard specification for impact attenuation of surface systems under and around playground equipment, ASTM F1292....
-
AN INCREASING NUMBER OF HEALTH CARE PROVIDERS ARE TRANSITIONING TO ADJUSTABLE HEIGHT TABLES
heights may be desirable, there currently are no commercially available examination tables or chairs that can reach a height lower than 19 inches uncompressed at its highest point on seating surface...
-
1. Typical Issues
The access aisle connects directly to an accessible route that leads to an accessible building entrance....
-
Temporary Solutions for Election Day: Accessible Entrance to Polling Place
Suggestion: If the threshold is not more than 3/4 inches high, add beveled surfaces to both sides of the threshold or replace with a new threshold that is no more than 1/2 inch high and...
-
Mounting Location and Height [4.30.6]
Where adequate wall space is not available on the latch-side, signs are to be placed on the nearest adjacent wall surface....
-
11B-406.5.3 Landings
The landing provides an area for users to exit the curb ramp and proceed along the walking surface at the top of the curb ramp....
